Equal Angle Steel 100mm X 100mm X 6 mm

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional equal angle steel 100mm x 100mm x 6 mm manufacturers and suppliers in China, also supports customized service. If you're going to buy equal angle steel 100mm x 100mm x 6 mm made in China, welcome to get free sample from our factory. Quality products and low price are available.

Equal Angle Steel 100mm x 100mm x 6 mm refers to an equal angle steel with a side length of 100 mm and a thickness of 6 mm. It is a steel product made of carbon structural steel or low-alloy high-strength structural steel. The cross-section shape is L-shaped, the length of the two sides is equal and both are 100 mm, and the thickness is uniformly 6 mm.

Mechanical properties
If Q235 material is used, the yield strength is generally around 235MPa, and the tensile strength is between 370-500MPa.
If Q345 material is used, the yield strength is not less than 345MPa, and the tensile strength is between 470-630MPa.

Processability: It is easy to perform processing operations such as bending, welding, and drilling, and can be made into components of various shapes according to actual engineering needs.

Smelting: Pig iron is obtained through blast furnace ironmaking, and then passed through steelmaking equipment such as converters or electric furnaces to remove impurities and adjust the chemical composition to obtain molten steel that meets the requirements.

Casting: Molten steel is cast into a specific mold to form a billet, which is commonly in the form of continuous casting billets.

Heating: The billet is heated to a suitable rolling temperature, generally between 1100-1250℃, so that the billet has good plasticity and toughness, which is convenient for rolling.

Rolling: The heated billet is rolled through multiple passes of the rolling mill and gradually rolled into an equilateral angle steel shape of 100mm x 100mm x 6 mm. .

Cooling: After rolling, the angle steel is cooled to room temperature by air cooling or water cooling. The cooling rate will affect the organizational structure and performance of the angle steel.

Finishing: The angle steel is subjected to finishing operations such as straightening, head cutting, and surface cleaning to remove surface defects such as oxide scale and burrs, and is packaged and stored after passing the inspection.

GNEE is a supplier of power tower angle steel with 17 years of production experience. It has a steel company, a new energy company, a hot-rolled steel company, and a metal company. It has a total of more than 200 employees and an annual output of 4.5 million tons of various special steels and 5 million tons of various metal deep-processing products.

The products we provide are strictly produced in accordance with standards, have passed quality certification, can provide quality certificates, and accept third-party testing.