S275JR Hot Rolled Angle Steel Bar

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional s275jr hot rolled angle steel bar manufacturers and suppliers in China, also supports customized service. If you're going to buy s275jr hot rolled angle steel bar made in China, welcome to get free sample from our factory. Quality products and low price are available.

S275JR Hot Rolled Angle Steel Bar

S275JR angle steel complies with European standard EN10025, and is divided into equal angle steel and unequal angle steel. It is available in black and galvanized versions, and can also be derusted and painted to prevent corrosion.

S275JR steel iron angle can withstand impact loads and reduce the risk of breakage. At the same time, S275JR angle steel beam also has a certain degree of corrosion resistance and can resist a certain degree of chemical corrosion and electrochemical corrosion.

Application of S275JR hot rolled steel angle ‌
‌ Construction industry ‌: used for bridges, high-rise buildings, industrial plants, etc.
‌ Machinery manufacturing ‌: manufacturing various mechanical parts, bearings, transmission devices, etc.

S275JR Hot Rolled Angle Steel Bar Products Details

 

►Mechnical property for S275JR carbon steel angle:

S275JR		Yield Point N/mm2 (min.)						Tensile Strength			Yield Ratio%			Elongation % (min.)							Impact
		Thickness						N/mm2			(max.)			Thickness							Thickness ≥ 12mm.
		t ≤ 16			16 < t ≤ 40									t ≤ 5		5 < t ≤ 16			t >16		Temp°C			Energy J (min.)
		275			265			410-560			-			23							+20			27

►Chemical composition for S275JR mild steel angle(Ladle Analysis Max%)

S275JR	C		Si	Mn		P	S		CEC	SWD		Nb	V		N		Cu	Ni		Cr		Mo
	max.					max.	max.		%max.	%max					max.		max.	max.		max.		max.
	0.21		-	1.50 max.		0.035	0.035		0.40	-		-	-		0.012		0.55	-		-		-

 

S275JR Angle Bar Products Image

 

 

FAQ

Q: What is S275JR grade hot rolled steel angle?

A: S275JR grade steel is a readily weldable low carbon manganese steel with good impact resistance.

Q: What is the difference between S235JR angle steel and S275JR angle iron?

A: In addition to their different yield strengths, S235JR and S275JR also have different tensile strengths and elongation properties. S235JR has a tensile strength of 360-510 MPa and an elongation of 26%, while S275JR has a tensile strength of 410-560 MPa and an elongation of 23%

Q: Is steel grade ASTM A36 structural angle and S275JR are equal angle?

A: Let us continue to make contrast. Both yield strength and tensile strength of S275JR carbon steel is higher than that of mild steel ASTM A36. So S275JR carbon steel can bear heavier load than mild steel ASTM A36. In other word, mild steel ASTM A36 is not equivalent to S275JR carbon steel.

If you have more needs and questions about S275JR hot rolled angle steel bar, please contact us!