Gnee Steel (Tianjin) Co., Ltd. is one of the most professional a36 w shapes w10x17 w10x19 steel beams manufacturers and suppliers in China, also supports customized service. If you're going to buy a36 w shapes w10x17 w10x19 steel beams made in China, welcome to get free sample from our factory. Quality products and low price are available.
A36 W Shapes w10x17 w10x19 Steel Beams
A36 W10x17 h section beam
Dimensions
Height: 10 inches (about 254 mm)
Flange width: 17 inches (about 432 mm)
Web thickness: 6.1 inches (about 155 mm)
Flange thickness: 8.4 inches (about 213 mm)
Cross-sectional area: 25.3 square inches (about 163.8 square centimeters)
Mechanical properties
Yield strength: ≥250 MPa
Tensile strength: 400-550 MPa
Elongation after fracture: ≥20%
Application
A36 W10x17 h beam structure is often used in building structures, bridges, mechanical equipment and industrial plants where high-strength support is required. Its wide flange design gives it superior performance when subjected to bending loads.
A36 W10x19 h shaped steel
Dimensions
Height: 10 inches (about 254 mm)
Flange width: 19 inches (about 483 mm)
Web thickness: 6.1 inches (about 155 mm)
Flange thickness: 7.6 inches (about 193 mm)
Cross-sectional area: 28.43 square inches (about 184.2 square centimeters)
Mechanical properties
Yield strength: ≥250 MPa
Tensile strength: 400-550 MPa
Elongation after fracture: ≥20%
Use
W10x19 steel is suitable for higher strength buildings and bridge structures, especially for engineering occasions that require greater load-bearing capacity and higher stability. Its wide flange design further enhances its bending resistance.
Summary and comparison
Size comparison: W10x19 h beam has a wider flange width and a larger cross-sectional area, so it has higher weight and load-bearing capacity.
Comparison of usage: W10x17 steel h beam is suitable for medium-strength building structures, while W10x19 h section steel is more suitable for high-strength bridges and industrial plants.
Common features: Both are made of A36 material, with excellent weldability and machinability, suitable for a variety of construction and engineering needs.
