A572Gr60 Hot Dipped H Beam Steel Structure

H-shaped steel is a profile with an "H" cross-section that is rolled based on A572Gr60 steel. Due to its optimized cross-sectional design, it has a high strength-to-weight ratio and bending resistance.

Hot-dip galvanizing is a surface treatment process that forms a zinc coating on the surface of A572Gr60 H-shaped steel by immersing it in molten zinc liquid to improve corrosion resistance and extend service life. This process is particularly suitable for steel structures in outdoor or humid environments.

Process flow of hot-dip galvanizing A572Gr60 H-shaped steel
Surface pretreatment: pickling removes oxide scale and impurities to ensure that the steel surface is clean.
Galvanizing: immerse the H-shaped steel in zinc liquid, and zinc reacts metallurgically with the steel surface.
Cooling and inspection: Cool after taking out to form a uniform galvanized layer.

Characteristics of A572Gr60 H-beam galvanized layer

Thickness: According to the standard, the coating thickness is usually between 50-150 microns, depending on the thickness of the steel and the galvanizing time.

Corrosion resistance: The zinc layer provides sacrificial anode protection, effectively preventing the corrosion of steel in humid, acidic or salt spray environments.

Adhesion: The low silicon content design of A572Gr60 makes it react moderately with zinc liquid, avoiding excessive thickness or peeling of the coating, and ensuring that it will not turn black after long-term use.

Delivery status of A572Gr60 hot-dip H-beam

The initial delivery status of A572Gr60 H-beam usually includes:

Hot rolling (HR): The most common state with good surface quality and mechanical properties.

Controlled rolling (CR): Further optimize the grain structure by controlling the rolling temperature and cooling rate.

Normalizing (N): Improve the uniformity and toughness of the steel.

Hot-dip galvanizing is a subsequent processing step, which is carried out after the H-beam is formed without changing the original delivery state.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.