Construction Structural Steel S355M Steel H Beam

S355M structural steel h beam is a thermomechanically rolled (TMCP - Thermomechanically Controlled Processing) fine grain structural steel as specified in European standard EN 10025-4, belonging to the S355 series of steels, with excellent strength, weldability and toughness, widely used in construction and engineering. The "M" indicates that it has been thermomechanically rolled, which enhances the mechanical properties for demanding structural applications.

S355M h beam steel structure is characterized by a minimum yield strength of 355 MPa (hence the name "S355", where "S" stands for structural steel), and even at low temperatures, S355M provides a good balance between strength, ductility and resistance to brittleness.

Dimensions and specifications
S355M H beams are available in a number of standard sizes, usually expressed as:
Height (h): The overall height of the beam.
Flange width (b): The width of the horizontal flange.
Web thickness (tw): The thickness of the vertical web.
Flange thickness (tf): The thickness of the flange.
Weight: Expressed in kg/m.

Comparison with other grades
S355J2 (EN 10025-2): A normalized rolled steel with similar yield strength but lower low temperature toughness than S355M.
S355NL (EN 10025-3): A normalized fine grain steel with similar properties, but the TMCP process of S355M offers better consistency and cost-effectiveness.
S420M (EN 10025-4): A stronger variant (yield strength of 420 MPa) for use when greater load capacity is required.

When manufactured from S355M steel, H-beams inherit the excellent mechanical properties of that material and are suitable for applications requiring high strength and durability in a wide range of environmental conditions.

Advantages of S355M h beam structure
High strength-to-weight ratio: The yield strength of 355 MPa and the optimized design of the H-beam combine to achieve efficient load distribution while reducing material weight.
Excellent weldability: Low carbon equivalent values ​​(typically CEV ≤ 0.39) ensure that S355M steel can be welded without significant risk of cracking or brittleness.
Low temperature performance: Toughness at sub-zero temperatures is suitable for structures in cold climates.
Cost effectiveness: Thermomechanical rolling reduces the need for additional heat treatment compared to quenched and tempered steels, reducing production costs.
Versatility: S355M H-beams can be used in a variety of applications from building frames to heavy machinery supports.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.