Hot Rolled Structural Steel H Beam S235J0

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional hot rolled structural steel h beam s235j0 manufacturers and suppliers in China, also supports customized service. If you're going to buy hot rolled structural steel h beam s235j0 made in China, welcome to get free sample from our factory. Quality products and low price are available.

S235J0 hot-rolled structural H-beam is a common European standard steel. GNEE can provide size customization and processing services according to customer requirements.

Features of S235J0 hot-rolled structural H-beam
Good mechanical properties: The yield strength of S235J0 steel is not less than 235MPa, the tensile strength is between 360-510MPa, the elongation after fracture varies according to the thickness of the profile, and the impact absorption energy at 0℃ is not less than 27J, which can withstand certain loads and impacts. At the same time, the H-beam has wide flanges, large lateral stiffness, and strong bending resistance, which is about 5%-10% higher than the I-beam.

Excellent processing performance: Hot-rolled H-beam is easy to cut, bend, drill and other processing operations, and is easy to make components of various shapes. It has good weldability and is easy to connect and combine with other components, which can improve construction efficiency and quality.

There are many common specifications of S235J0H hot-rolled structural H-shaped steel.
100×100×6×8: indicates a height of 100mm, a width of 100mm, a web thickness of 6mm, and a wing thickness of 8mm.
150×150×7×10: a height of 150mm, a width of 150mm, a web thickness of 7mm, and a wing thickness of 10mm.
200×100×5.5×8: a height of 200mm, a width of 100mm, a web thickness of 5.5mm, and a wing thickness of 8mm.
200×200×8×12: a height and a width of 200mm, a web thickness of 8mm, and a wing thickness of 12mm.
248×124×5×8: a height of 248mm, a width of 124mm, a web thickness of 5mm, and a wing thickness of 8mm.
250×125×6×9: height 250mm, width 125mm, web thickness 6mm, wing thickness 9mm.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.