Gnee Steel (Tianjin) Co., Ltd. is one of the most professional s355j2 hot rolled structural h steel beam manufacturers and suppliers in China, also supports customized service. If you're going to buy s355j2 hot rolled structural h steel beam made in China, welcome to get free sample from our factory. Quality products and low price are available.
S355J2 Hot Rolled Structural H Steel Beam
What is S355J2 H beam?
The S355J2 h shaped steel beam is a structural steel profile that complies with standard EN 10025-2, which specifies hot rolled products of structural steels. The "S" indicates that it is a structural steel, the "355" indicates that it has a minimum yield strength of 355 MPa, and the "J2" indicates that the material has a specified impact value at a certain low temperature, in this case -20°C.
Material properties
Yield Strength: S355J2 has a minimum yield strength of 355 MPa.
Tensile Strength: The tensile strength of S355J2 is typically between 470 and 630 MPa.
Elongation: The elongation at break at 200mm is typically around 17-22%.
Impact Value: Has a specified impact value at -20°C, which is a measure of its toughness under dynamic load conditions.
Applications of S355J2 h shaped iron beam: Construction of buildings and bridges; Industrial sheds and warehouses; Support structures for heavy machinery; Crane tracks; Marine structures; General structural steel structures, etc.
GNEE can provide various surface treatments for S355J2 H-shaped steel
Black: Standard hot rolled surface.
Galvanized: Coated with a layer of zinc to prevent corrosion.
Primered: Coated with a primer to enhance corrosion resistance.
| Model Number |
Q235B/C/D Q345B/C/D/E Q390B/C/D/E Q420B/C/D/E Q460/C/D/E Q500/C/D/E SS400 SM490A/B SN400A/B SN490B S235JR/J0 S275JR/J0/J2 S355JR/J0/J2 S355K2 S450J0 S355M/L S460M S355J0WP/J2WP S355J0W/J2W/K2W |
| Application | Industry/Chemical Equipment |
| Welding Line Type | Welding |
| Processing Service | Bending, Punching, Cutting, Moulding |
| Length | 6000mm 9000mm 12000mm or Customized |
| Technique | Hot Rolled Cold Rolled |
| Payment terms | L/C T/T (30%DEPOSIT) |
| Process method | Standard |
GNEE Steel H Beam Steel Manufacturer
GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.
