S355K2 Steel Construction H Beam

In S355K2 h section beam, "S" stands for structural steel, "355" means that the minimum yield strength of steel with a thickness of no more than 16mm is 355MPa, and "K2" means that the steel has good impact resistance at -20℃ and is widely used in the construction industry and various engineering structures.

The main chemical composition limits of S355K2 are: C≤0.24%, Si≤0.60%, Mn≤1.70%, P≤0.035%, S≤0.035%, Cu≤0.60%.

Carbon equivalent (CEV) is an important indicator for evaluating the weldability and NMenability of steel. The S355K2 h beam structure CEV value provided by GNEE is usually within a certain range to ensure good mechanical properties and processing properties.

The tensile strength of S355K2 is in the range of 450-600MPa, providing good strength support for the structure. The impact energy at -20℃ is ≥27J, and it has good toughness at low temperature and can resist impact load well.

The S355K2 construction H-beam provided by GNEE is produced in accordance with the European standard EN 10025-2:2004. We have detailed requirements for the chemical composition, mechanical properties, dimensional tolerance, surface quality, etc. of the steel. GNEE will carry out strict quality control and inspection during the production process to ensure that each batch of products meets the corresponding standards.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.