Structural Steel Profiles S235J0 Hot Rolled

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional structural steel profiles s235j0 hot rolled manufacturers and suppliers in China, also supports customized service. If you're going to buy structural steel profiles s235j0 hot rolled made in China, welcome to get free sample from our factory. Quality products and low price are available.

S235J0 low carbon steel is widely used in the fields of construction and engineering, especially in occasions where certain strength and good welding performance are required, and the European standard EN 10025-2 is implemented.

Material characteristics of S235J0 h beam steel structure
Yield strength: The minimum yield strength is 235 MPa (applicable to profiles with a thickness of ≤16mm).
Toughness: J0 means that the minimum impact energy of the Charpy V-notch impact test at 0°C is 27 joules, which is suitable for use in a lower temperature environment.
Chemical composition: Low carbon content (usually ≤0.17%) and appropriate amounts of manganese, phosphorus, sulfur and other elements ensure its good weldability and formability.
Hot rolling process: S235J0 H profiles are formed by high temperature rolling, with good surface quality and internal uniformity.

Features and advantages of S235J0 H-profile

Cross-sectional shape: H-profile (H-beam) is a steel structural member with an "H"-shaped cross section, which has high bending resistance and optimized cross-sectional area distribution. Its flanges are parallel or nearly parallel inside and outside, and the flange ends are at right angles.

High strength: weight ratio, suitable for use as load-bearing structures; easy assembly, which can reduce welding and riveting workload; excellent performance when subjected to bending moments, pressure loads or eccentric loads.

Specifications: Common H-profile sizes range from 100mm to more than 1000mm in height, depending on the production standard (such as European HEB, HEA, HEM series).

GNEE's processing services
Welding: S235J0 h profile steel does not require preheating for direct welding. As the thickness increases, we will adjust the welding process appropriately.

Surface treatment: The surface of hot-rolled H-profiles may have oxide scale, and sandblasting, painting or galvanizing can be selected depending on the application.

Customization: It can be cut, drilled or processed into specific lengths and shapes according to engineering needs.

Comparison with relevant standards
S235JR: Compared with S235J0, the impact test of S235JR is carried out at 20°C, which is suitable for normal temperature environment, while S235J0 is more suitable for low temperature conditions.
S235J2: Further improves toughness, and the impact test is carried out at -20°C.
Other standards: S235J0 is roughly equivalent to China's Q235B (GB/T 700 standard).

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.