Gnee Steel (Tianjin) Co., Ltd. is one of the most professional ub 356x171x45 356x171x51 s355jr universal structural beam manufacturers and suppliers in China, also supports customized service. If you're going to buy ub 356x171x45 356x171x51 s355jr universal structural beam made in China, welcome to get free sample from our factory. Quality products and low price are available.
UB 356x171x45 356x171x51 S355JR Universal Structural Beam
UB 356x171x45 h beam structure: UB stands for the British standard Universal Beam, 356mm is the section height, 171mm is the flange width, and 45kg/m is the theoretical weight.
UB 356x171x51 h shaped steel: Section height 356mm, flange width 171mm, theoretical weight 51kg/m.
UB 356x171x45 Universal Steel Beam
Section height: 356mm
Flange width: 171mm
Web thickness: 8.0~10.0mm
Flange thickness: 12.0~14.0mm
Theoretical weight: 45kg/m
UB 356x171x51 Steel Universal Beam
Section height: 356mm
Flange width: 171mm
Web thickness: 10.0~12.0mm
Flange thickness: 14.0~16.0mm
Theoretical weight: 51kg/m
UB Sectional Characteristics
Aspect Ratio Optimization: The H-shaped structure provides high bending resistance and is suitable for heavy load and high stability requirements.
Carrying capacity: The UB 356x171x51 structural steel h beam has a slightly higher carrying capacity than the UB 356x171x45 steel h column due to its thicker web and flange.
S355JR chemical composition: carbon (C) ≤ 0.24%, manganese (Mn) ≤ 1.6%, phosphorus (P) ≤ 0.035%, sulfur (S) ≤ 0.035%.
S355JR h beam material mechanical properties Yield strength: ≥ 355MPa (thickness ≤ 40mm).
Tensile strength: 470~630MPa (meet EN standards).
Impact toughness: impact energy ≥ 27J at room temperature (20℃), suitable for general dynamic loads and impact environments.
UB Steel application areas
Construction engineering : UB 356x171x45 h type beam: industrial plant support beams, non-extreme heavy load platforms.
UB 356x171x51 h type steel beam: high-rise building frames, load-bearing structures in earthquake zones.
Bridges and heavy machinery: Suitable for bridge main beams and heavy equipment brackets (such as port cranes).
Marine engineering: UB 356x171x51 h shaped beam is used for offshore platform support structures and is resistant to salt spray corrosion (surface treatment is required).
UB356x171x51 h beam section: Need to withstand extreme loads or marine environments (such as petrochemical equipment and cross-sea bridges).
UB356x171x45 steel h profile: General scenarios such as conventional industrial plants and non-cryogenic bridges.
