W Shape Beam W12x152 W12x170 A992 Material H Beam

W Shape Beam W12x152 W12x170 A992 Material H Beam

W12x152 W12x170 structural h beam made of A992 are two different specifications of American standard H-beam, which are commonly used for load-bearing and supporting components in building structures.
Description
Technical Parameters

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional w shape beam w12x152 w12x170 a992 material h beam manufacturers and suppliers in China, also supports customized service. If you're going to buy w shape beam w12x152 w12x170 a992 material h beam made in China, welcome to get free sample from our factory. Quality products and low price are available.

 

w shape beam w12x152 w12x170 A992 material h beam

 

 

A992 W12x152 steel wide flange beam


Dimensions (approximate): Approximately 12 inches tall, 152 pounds per foot.
Cross-sectional area: Approximately 44.5 square inches.
Moment of inertia (Ix): Approximately 533 square inches.
Moment of resistance (Sx): Approximately 88.9 cubic inches.
Radius of gyration (rx): Approximately 3.46 inches.

 

 

A992 W12x170 h beam wide flange


Dimensions (approximate): Also approximately 12 inches tall, but 170 pounds per foot.
Cross-sectional area: Approximately 50.0 square inches (approximately 32,258 square millimeters).
Moment of inertia (Ix): Approximately 630 square inches (approximately 4,064,516 square millimeters).
Moment of resistance (Sx): Approximately 105 cubic inches (approximately 1,720,000 cubic millimeters).
Radius of gyration (rx): Approximately 3.55 inches (approximately 90.2 millimeters).

 

 

A992 h beam material


Yield strength (Fy): Minimum 50 ksi (thousand pounds per square inch), equivalent to 345 MPa (megapascals).
Tensile strength (Fu): Minimum 65 ksi (approximately 448 MPa).
Elongation: Minimum 20% within 2 inches or 5 times the diameter.

 

 

Precautions for use


Standard specifications: The use of A992 material and W12 series steel conforms to the American ASTM A992/A992M standard.


Processing and installation: The edges and joints of the steel usually require chamfering or rounding to improve the overall stability and durability of the structure. At the same time, welding and installation must be carried out strictly in accordance with design requirements.


Engineering adaptability: According to the load and span requirements of the specific project, select the appropriate model and specification to ensure structural safety.

 

h section steel

h section steel beams

 

Hot Tags: w shape beam w12x152 w12x170 a992 material h beam, China w shape beam w12x152 w12x170 a992 material h beam manufacturers, suppliers, factory, FH32 Structural H Beam, Q345GJE Q345GJD H Beam Iron, high beam steel, hea steel beam, hot rolled h beam, 304 304N 304L 304LN Stainless Steel H Section