Mild Steel Angle | 30mm X 30mm 3mm Thick

 

30mm x 30mm x 3mm Mild Steel Equal Angle is a common equilateral angle steel with a side length of 30mm, a thickness of 3mm, a carbon content between 0.05%-0.25%, and two sides of equal length and an angle of 90 degrees. It is suitable for various structures with medium strength and load requirements.

 

 

30mm x 30mm x 3mm Mild Steel Equal Angle is a common equilateral angle steel with a side length of 30mm, a thickness of 3mm, a carbon content between 0.05%-0.25%, equal lengths of the two sides, and an angle of 90 degrees. Suitable for various structures with medium strength and load requirements.

 

Medium Strength: 30mm x 30mm x 3mm angle steel is relatively thin, but the bending strength and tensile strength can meet the requirements of light and medium loads.

 

Good processing performance: angle bar 30MM x 30MM x 3MM is easy to cut, bend, stamp, etc. during processing, and is suitable for manufacturing various parts or structural parts.

 

Moderate weight: Compared with thicker angle steel, 3mm thick angle steel is lighter and easier to transport and install.

 

Lower cost: Compared with thicker angle steel, 30mm x 30mm x 3mm angle steel has a lower cost and is suitable for projects with limited budgets.

Easy to process and install: Due to its small size and good processability, 30mm x 30mm x 3mm angle steel is easy to process and install on site.

 

 

Automobile bracket: used in automobile chassis, frame and other parts as support and connector.
Transportation equipment: used for support and frame structure of trucks, trailers, etc.
Power bracket: used in support structure of power equipment, substations, power lines, etc.
Power tower structure: used for support and connection of power towers, cable racks, etc.
Furniture frame: such as the angle steel part used for support and connection in industrial style furniture.

 

 

Chemical composition analysis: Check the content of carbon, silicon, manganese, phosphorus, sulfur and other elements through spectral analysis and other methods to ensure that they meet the composition requirements of low-carbon steel.

Tensile test: Test tensile strength, yield strength, elongation, etc.
Hardness test: Use Rockwell NMness tester to test NMness.
Impact test: Perform impact test at low temperature or room temperature to test its impact resistance.
Ultrasonic testing (UT): Used to detect whether there are defects such as pores and cracks inside the angle steel.
Magnetic particle testing (MT): Suitable for checking surface and near-surface defects of angle steel.

 

 

 

GNEE has a professional technical team, we have 17 years of working experience in the steel industry, and have a deep and clear understanding of the technical conditions and production status of major Chinese steel mills.

With our efficient supervision system and professional experience, we provide efficient and thoughtful services to global customers. We sincerely hope to become your Chinese supplier and partner.