Name: China NFA35-502 E 36 WB 3 Corten Metal Sheet Manufacturers Suppliers Factory - Free Sample - Gnee Steel
Brand: GNEE
SKU: 250996608

Description

Technical Parameters

NFA35-502 E 36 WB 3 corten metal sheet

Corrosion Resistant Steel Plate Products Description

E 36 WB 3 corten steel material is a weathering steel, more precisely "atmospheric corrosion resistant steel", the chemical composition of E 36 WB 3 corten steel metal improves atmospheric corrosion resistance, this is because under the influence of weather, a protective layer is formed on the surface of E 36 WB 3 steel.

E 36 WB 3 corten steel plate delivery status:
Hot rolled, cold rolled, normalized, quenched, tempered, thermomechanical controlled process (TMCP), electroslag remelting technology, HIC test.

E 36 WB 3 corten steel sheet application range:
E 36 WB 3 corten weathering steel is used for various types of welded, bolted and riveted structures, such as steel frame structures, bridges, tanks and containers, exhaust systems, vehicle and equipment construction, etc.

NFA35-502 E 36 WB 3 Corten Metal Sheet Products Details

E 36 WB 3 steel chemical composition(%):

C	Si	Mn	P	S	Cr	N	Cu	CEV
max 0.16	Max 0.5	0.5 - 1.5	max 0.035	Max 0.035	0.4 -0.8	max 0.009	0.25-0.55	Max 0.52
Note: 1. The steels may show a Ni content of max 0.65 %; 2. For long E 36 WB 3 steel, the P and S content can be 0.005% higher; 3. The E 36 WB 3 steel may contain max. 0.30 % Mo and max. 0.15 % Zr 4. It is permissible to exceed the specified values provided that for each increase of 0.001 % N, the P max. content will be reduced by 0.005 %; the N content of the ladle analysis, however, shall not be more than 0.012 % 5.The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0.020 % or if sufficient other N binding elements are present.

E 36 WB 3 steel mechanical property:

Nominal thickness (mm)	to 16	16-40	40-63	63-80	80-100	100-150
ReH - Minimum yield strength (MPa)	355	345	335	325	315	295
Nominal thickness (mm)	To 3		3-100		100-150
Rm -Tensile strength (MPa)	510-680		470-630		450-600
Nominal thickness (mm)	3-40		40-63		63-100	100-150
A - Minimum elongation Lo = 5,65 √ So (%)	22		21		20	18
Nominal thickness (mm)	1.5 - 2		2-2.5		2.5-3
A - Minimum elongation Lo = Lo = 80 mm (%)	16		17		18
Temperature	-20			0
Notch impact test. Min. absorbed energy	27			27