Flat Steel

 Flat Steel

The product specification is special. Thickness in 8 ~ 50mm, width 150-625mm, length 5-15m, and product specifications file distance is dense, can meet the needs of users, instead of the use of center plate, without cutting, can be directly welded.
Product surface finish. In the process of secondary high-pressure water descaling process, to ensure that the surface of the steel is clean.
The two side edges are vertical and the corners are clear. Finishing rolling in the two vertical rolling, to ensure that the two sides of the verticality of good, clear corners, the edge of the surface quality is good.
The scale of the product is accurate, three-point difference, the same level of difference is better than the standard of steel plate; the product is straight and the plate shape is good. Finishing rolling adopts continuous rolling process, automatic live sleeve automatic control, to ensure that no pile of steel does not pull steel, the product size precision, tolerance range, three-point difference, the same bar difference, sickle bend and other parameters are better than the medium plate, and plate straightness is good. Cold shear cutting, high precision of length sizing.
The material of the product adopts the national standard, which is the same as the steel plate. Quality and technical standards according to YB/T4212-2010 standard organization and production (Q345B/Q235B refer to GB/T1591-94, GB/T700-06 standards respectively).
 

If you have more needs and questions about Flat Steel, please contact us!