Gnee Steel (Tianjin) Co., Ltd. is one of the most professional 1016x305x249 1016x305x272 s355jr structure beam steel manufacturers and suppliers in China, also supports customized service. If you're going to buy 1016x305x249 1016x305x272 s355jr structure beam steel made in China, welcome to get free sample from our factory. Quality products and low price are available.
1016x305x249 1016x305x272 S355JR structure beam steel
S355JR h-shaped steel beam is a European standard low-alloy high-strength structural steel, following the EN 10025-2:2004 standard, with a minimum yield strength ≥355MPa, and is suitable for impact toughness scenarios at room temperature (+20℃) (impact energy ≥27J).
1016×305×249 h-type beam dimensions: section height of about 1016mm, flange width of about 305mm, unit length weight of about 249kg/m, web thickness of about 14.6mm, and flange thickness of about 24.8mm.
1016×305×272 h-type steel beam geometric dimensions: section height of about 1016mm, flange width of about 305mm, unit length weight of about 272kg/m, web thickness of about 16.3mm, and flange thickness of about 27.0mm.
Applications of S355JR steel beam h
High-rise buildings: used in key load-bearing parts such as core tubes and truss beams to optimize space utilization and seismic performance.
Heavy machinery: used as crane main beams or mining equipment skeletons to withstand heavy loads and dynamic impacts.
Bridge engineering: suitable for large-span bridge main beams, and its fatigue resistance meets long-term dynamic load requirements.
Performance comparison and selection advantages
| characteristic | S355JR h beam | Ordinary carbon steel (such as Q235 steel) |
|---|---|---|
| Yield Strength | ≥355MPa (thickness ≤16mm) | 235MPa |
| Low temperature toughness | Normal temperature impact energy ≥27J | No low temperature toughness guarantee |
| Corrosion resistance | Alloying elements enhance corrosion resistance | Additional surface treatment required |
| Welding performance | Low crack sensitivity (carbon equivalent ≤ 0.45%) | Welding defects are likely to occur |
