EN 10025-2 S275J2 Hot Rolled Structural Steel H Beam

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional en 10025-2 s275j2 hot rolled structural steel h beam manufacturers and suppliers in China, also supports customized service. If you're going to buy en 10025-2 s275j2 hot rolled structural steel h beam made in China, welcome to get free sample from our factory. Quality products and low price are available.

Chemical composition of S275J2 hot-rolled H-beam: carbon (C) content is up to 0.18%, manganese (Mn) content is up to 1.5%, phosphorus (P) content is up to 0.03%, sulfur (S) content is up to 0.03%, and copper (Cu) content is up to 0.55%. When the nominal thickness is less than or equal to 40mm, the maximum CEV (carbon equivalent value) is 0.40.

Mechanical properties of S275J2 structural H-beam
Yield strength: The minimum yield strength varies with the nominal thickness of the steel.
Tensile strength: The tensile strength also varies with the nominal thickness.
Impact energy: The longitudinal impact energy is 27 J at - 20 °C, 0 °C and + 20 °C.

Advantages
High strength and good toughness: It has high strength and good toughness, can effectively withstand various loads and resist impact, and is suitable for use in harsh working environments.

Good weldability: It can be easily welded with other weldable steels, which is conducive to the construction and connection of steel structures.
Good processability: It is easy to cut, drill and form, which can meet the processing requirements of different construction projects and improve construction efficiency.

S275J2 hot-rolled H-shaped steel has a variety of specifications and sizes, including common web width (H), flange width (B), web thickness (t1), flange thickness (t2), and the length is usually 9m, 12m, or other lengths can be customized according to specific requirements.

Application of S275J2 structural H-shaped steel beams
Building structure: It is widely used in beams, columns, and frames of industrial and civil buildings, and can also be used in the construction of high-rise buildings and large-span warehouses.

Bridge engineering: It is used in the construction of highway bridges, railway bridges, and pedestrian overpasses.
Machinery and equipment manufacturing: It is used in the manufacture of lifting and transportation equipment such as cranes and forklifts.
Other fields: Also used in the construction of transmission towers, oil and gas platforms, etc.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.