HEA600 HEB600 Steel Profile H Beam S355J0/S355J2

The section of HEA h steel profile usually has equal flange width, relatively thin web thickness, and the inner angle of the flange is usually right angle.

The section of HEB H-section steel beam usually has wider flange and thicker web, and the inner angle of the flange can be beveled, which has better performance when subjected to bending loads.

HEA600 steel h profile has narrow flange width and relatively thin web thickness; HEB600 h beam section has wider flange width and thicker web thickness.

HEA HEB600 h beam profile can be made of the same material, such as S235JR h beam, S275JR steel h beam, S355JR h section steel, S355J0 h shaped steel, S355J2 h beam structure, etc., depending on the application requirements.

HEA HEB Installation and Construction
HEA h steel profile may be easier to install and construct in some cases due to its symmetrical cross-sectional shape; HEB steel profile may require more complex construction techniques and support, especially in structures that need to withstand larger loads.

S355J0 h beam iron material: The impact energy absorption value of this steel at 0℃ should reach 27J, which is suitable for applications with certain requirements for low-temperature toughness.

S355J2 steel beam material: Compared with S355J0, the impact energy absorption value of S355J2 at -20℃ should reach 40J, and it can still maintain good toughness at lower temperatures, which is suitable for more stringent low-temperature environments.