hot rolled W30x326 A572GR50/A992 h beam wide flange
A572GR50 h beam steel structure Material: It is a low-alloy high-strength structural steel with a yield strength of 50ksi (about 345MPa). It has high strength and can withstand large loads. It is suitable for occasions with high requirements for structural bearing capacity.
A992 h section steel Material: It is also a commonly used structural steel material with a yield strength of about 50ksi. It has high toughness and good processing performance. It performs well in impact resistance and earthquake resistance. It can adapt to various complex stress conditions and is easy to cut, bend, drill and other processing operations to meet the construction needs of different projects.
Wide Flange H Beam Specifications
"W30" means that the height of the steel section is about 30 inches, or 762 mm.
"326" means that the weight of the steel section is 326 pounds per foot, which is about 485.8 kilograms per meter after conversion.
The W30x326 w flange beam has a wide flange width and a thick web thickness. It has a large moment of inertia and section modulus. It has excellent performance in bending, shear and compression. It can efficiently transfer and bear loads and can be used to build large and heavy-loaded structural systems.
Production process of W30x326 w shape beam
Steelmaking: Strictly in accordance with relevant standards, the raw materials are refined into molten steel that meets the material requirements of A572GR50 and A992, and the chemical composition of the molten steel is accurately controlled to ensure the stable performance of the steel.
Rolling: The steel billet is heated to a suitable temperature range, and then the steel billet is gradually rolled into the shape of W30x326 steel section through multiple hot rolling processes.
Heat treatment (optional): According to the needs, the steel section may be heat treated, such as normalizing, tempering, quenching, etc., to further improve the strength, toughness and other mechanical properties of the steel to meet the special requirements of different projects.
Surface treatment: In order to improve the corrosion resistance and service life of the steel section, it is usually subjected to surface treatment, such as hot-dip galvanizing, spraying anti-corrosion paint, etc.
