Gnee Steel (Tianjin) Co., Ltd. is one of the most professional s355jr 762x267x147 762x267x173 hot rolled steel beam manufacturers and suppliers in China, also supports customized service. If you're going to buy s355jr 762x267x147 762x267x173 hot rolled steel beam made in China, welcome to get free sample from our factory. Quality products and low price are available.
S355JR 762x267x147 762x267x173 Hot Rolled Steel Beam
UB 762x267x173 universal structural steel beam has a greater web or flange thickness, which can provide higher load-bearing capacity. These steel sections usually follow British Standards (BS Standards) or other international standards and are manufactured using S355JR material.
Introduction of S355JR structural h beam
Following standard: EN 10025 (European standard)
Type: low alloy high strength structural steel
Yield strength: not less than 355 MPa (megapascals)
Tensile strength: usually between 470 and 630 MPa
Elongation: at least 22%
Impact toughness: minimum 27 joules at +20°C
Chemical composition: mainly composed of iron, containing small amounts of carbon (maximum 0.22%), manganese (maximum 1.60%), silicon (maximum 0.55%) and other elements, as well as strictly limited phosphorus and sulfur content (both not exceeding 0.025%)
Application areas of UB 762x267x147/173 Universal Beam Structural Section
Long-span bridge construction
Main load-bearing structure of high-rise buildings
Main frame support of industrial plants
Other engineering structures requiring high bearing capacity and good toughness
S355JR Structural Steel H Beam Welding performance
S355JR material has excellent welding performance and is suitable for a variety of welding methods, including manual metal arc welding (SMAW), gas metal arc welding (GMAW/MIG), flux-cored arc welding (FCAW), etc.
