S275J2 Low Carbon Steel H Beam

The "S" in S275J2 h beam structure stands for structural steel, "275" indicates the minimum yield strength of 275 MPa (thickness ≤ 16 mm), and "J2" indicates its toughness, with a minimum impact energy of 27 joules at -20°C. When made into H-beams, S275J2 h section beam is a versatile and cost-effective structural framing material that provides reliable performance in a variety of demanding environments.

Delivery Conditions
S275J2 H beams are usually supplied in hot rolled, normalized or controlled rolled condition. GNEE can perform additional tests such as ultrasonic inspection or low temperature impact test upon request. We will provide a mill test certificate (e.g. EN 10204 3.1 or 3.2) to verify compliance with the specification.

Advantages of S275J2 Carbon H Beam

Cost-effectiveness: S275J2 mild steel h beam offers a good balance between strength and price compared to higher grade steels.

Weldability: Low carbon content allows easy welding without preheating in most cases.

Versatility: Suitable for a wide range of structural applications due to its mechanical properties and formability.

Toughness: J2 grade ensures reliable performance in sub-zero conditions.

Physical properties of S275J2 structural h beam
Density: 7.85 g/cm³
Melting point: 1420–1460°C (2590–2660°F)
Thermal conductivity: about 50 W/m·K (typical for carbon steel)

S275J2 h shaped steel is produced by hot rolling, a process in which the steel ingot is heated to high temperatures and then passed through rollers to form a characteristic H-shaped cross-section, which has excellent load-bearing capacity and is usually supplied in the normalized or controlled rolled state.

H-shaped steel made from S275J2 h section steel beam has wide flanges and thick webs, with high strength-to-weight ratio and resistance to bending and shear forces. GNEE is available in a variety of sizes to meet different structural needs.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.