Gnee Steel (Tianjin) Co., Ltd. is one of the most professional w shape w12x210 w12x230 structural steel beam manufacturers and suppliers in China, also supports customized service. If you're going to buy w shape w12x210 w12x230 structural steel beam made in China, welcome to get free sample from our factory. Quality products and low price are available.
w shape w12x210 w12x230 structural steel beam
Material properties of A36 h shaped steel
Chemical composition: C≤0.25%~0.29%, Si at 0.15%~0.4%, Mn at 0.8%~1.2%, P≤0.04%, S≤0.05%, Cu≤0.2%.
Mechanical properties
Yield strength: ≥250 MPa;
Tensile strength: 400~550 MPa;
Elongation: ≥20%;
Impact toughness (0℃): ≥27 J.
W-shaped steel specification parameters
W12x210/W12x230 h section steel: "W" means wide flange H-shaped steel, "12" is the section height (inches), and "210/230" is the weight per foot (pounds).
W12x210 h type steel beam
Section height ≈ 12.5 inches (318 mm);
Flange width ≈ 12.4 inches (315 mm);
Web thickness ≈ 1.16 inches (29.5 mm);
Theoretical weight ≈ 210 lb/ft (312 kg/m).
W12x230 h steel profile
Section height ≈ 13.0 inches (330 mm);
Flange width ≈ 13.1 inches (333 mm);
Web thickness ≈ 1.26 inches (32 mm);
Theoretical weight ≈ 230 lb/ft (342 kg/m).
Note: Specific dimensions must be based on ASTM A6 standards or manufacturer data sheets.
Performance characteristics
Carrying capacity: High section modulus and moment of inertia, suitable for bearing heavy loads and large-span structures; W12x230 h beam section has slightly higher bending and shear resistance than W12x210 structural steel beam due to its heavier weight.
Processability: Can be cut, welded, drilled and other processes, suitable for complex structural requirements.
Weather resistance: Good corrosion resistance under normal conditions, surface treatment (such as painting) is required in humid/corrosive environments.
Application areas
Building structure: High-rise building frames, industrial plant beams and support columns.
Bridge engineering: Key load-bearing components such as main beams and bridge piers.
Heavy machinery: Equipment base, crane components, etc.
Ship and pressure vessel: Hull structure, pressure vessel support (must meet specific design specifications).




















