Gnee Steel (Tianjin) Co., Ltd. is one of the most professional w21x182 heavy duty steel h beam manufacturers and suppliers in China, also supports customized service. If you're going to buy w21x182 heavy duty steel h beam made in China, welcome to get free sample from our factory. Quality products and low price are available.
W21x182 Heavy Duty Steel h Beam
Basic parameters of W21x182 h type beam
Theoretical weight: about 182 pounds per foot, which is about 271.4 kg/m in metric.
Flange width (bf): about 267 mm
Waist height (d): about 533 mm (nominally 21 inches)
Waist thickness (tw): about 15.9 mm
Flange thickness (tf): about 22.2 mm
W21x182 h shaped beam is usually made of high-strength low-alloy steel. Common material standards include A36, A572 Gr.50 or A992, etc., with good weldability, processability and mechanical properties.
W21x182 h type steel beam material
A36 h beam has a yield strength of at least 36,000 psi (about 250 MPa), which is suitable for general construction applications. A572 Gr.50 h beam material and A992 steel h beam can provide higher yield strength (50,000 psi or about 345 MPa), which is more suitable for applications requiring higher strength and seismic performance.
Features and advantages of W21x182 h-shaped steel
High strength: High yield strength and tensile strength, very suitable for occasions with large loads.
Good stability: The wide flange design can increase the ability to resist lateral bending and improve the stability of the overall structure.
Transportation of W21x182 Heavy Duty Steel H Beam
Packaging and fixing
GNEE will use steel belts or plastic film to wrap and protect the surface to prevent scratches or corrosion; we will use special shelves/pallets for fixing, evenly distribute the support points to avoid shaking; cushioning materials (such as rubber pads) need to be added at the contact between the flange and the web.
Vehicle selection
GNEE will give priority to flatbed trucks or special H-beam transportation vehicles, and the load capacity must be greater than the weight of the steel (about 3.2 tons/12 meters for a single piece).
Transport protection
GNEE will cover the rainproof tarpaulin to prevent rain erosion; regularly check the fixing status (once every 2 hours); we will avoid rugged roads, keep the speed ≤60km/h, and reduce the inertial displacement caused by sudden braking.
