A572Gr60 H Beam Structure

A572Gr60 H-shaped steel belongs to the ASTM A572 series of high-strength low-alloy structural steels. "Gr60" indicates that the steel has a yield strength of 60 ksi.

Mechanical properties of A572Gr60 h shaped beam
Yield strength: 60 ksi (about 414 MPa).
Tensile strength: ≥520 MPa, usually between 70-90 ksi (about 485-620 MPa).
Elongation: 16% minimum elongation for 8 inches (≤200 mm) and 18% minimum elongation for 2 inches (50 mm).
Impact temperature: -20°C, indicating good performance in low temperature environments.

Chemical composition of A572Gr60 h section steel beams
Carbon (C): 0.26%-0.35%.
Silicon (Si): 0.93%-1.20%.
Manganese (Mn): 0.80%-1.10%.
Phosphorus (P) and sulfur (S): both do not exceed 0.04%.
Chromium (Cr): 0.75%-1.20%.
Other alloying elements such as nickel (Ni) and copper (Cu) have lower contents.

Performance of A572Gr60 h beam steel structure
Weldability: It has good weldability and can be welded manually or automatically through appropriate welding processes to ensure the quality of the weld.
Resistance to lamellar tearing: After welding and other heat treatments, the steel can maintain good plasticity and toughness.
Toughness: It can maintain integrity and prevent breakage or deformation when subjected to impact or vibration.
Corrosion resistance: It has certain corrosion resistance and can maintain its performance and appearance for a long time.

Advantages of A572Gr60 structural steel h beam
High strength: It has higher yield strength and tensile strength than ordinary carbon steel, can withstand larger loads and maintain structural stability.
Good weldability: Although A572Gr60 H-beam steel belongs to high-strength steel, it has good weldability and can meet various connection needs such as construction and manufacturing.
Good toughness: It shows good performance under impact or dynamic loads and can effectively resist fracture and deformation.
Good corrosion resistance: It has certain corrosion resistance and can be used in some environments with moderate corrosion requirements to extend the service life of the structure.
Uniform stress: The stress distribution of A572Gr60 H-beam is relatively uniform, which is beneficial to the overall performance of the structure.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.