EN S355J0 356x406x467 356x406x551 Structural Universal Columns

S355J0 h section beam is a low alloy high strength structural steel defined in European standard EN 10025-2. It belongs to the H-section steel series and performs well under static and dynamic loads. It is especially suitable for use in low temperature environments.

Chemical composition of S355J0 h section steel
Carbon (C): about 0.22%
Manganese (Mn): 1.60%-1.90%
Silicon (Si): not more than 0.55%
Phosphorus (P): not more than 0.035%
Sulfur (S): not more than 0.035%

Mechanical properties of S355J0 h beam structure
Yield strength (Reh): ≥355 MPa
Tensile strength (Rm): 470-630 MPa
Elongation (A5): ≥22%
Impact toughness (KV -20°C): ≥27 J

Characteristics of S355J0 h section beam
Low temperature toughness: The impact toughness can still reach 27 J at -20°C, which is suitable for low temperature environments.
Weather resistance: Good corrosion resistance under adverse climatic conditions.
Weldability: Good weldability facilitates on-site construction and installation.
High strength: High yield strength and tensile strength, suitable for structures that bear large loads.

UC 356x406x467 Universal Column
Height (H): 356 mm
Width (B): 406 mm
Web thickness (t): 467 mm

UC 356x406x551 Universal Structural Steel Column
Height (H): 356 mm
Width (B): 406 mm
Web thickness (t): 551 mm

Application of UC steel made of S355J0
Building structures: such as high-rise buildings, factory frames, etc.
Bridge engineering: bridge components used to bear heavy loads.
Mechanical manufacturing: such as cranes, conveying equipment, etc.
Shipbuilding and marine engineering: suitable for offshore platforms and hull structures.
Automotive industry: used to manufacture vehicle chassis and structural parts.