JIS G3192 H Beam
Advantages
- High load-bearing capacity：The I-section design of H-beam optimizes the bending and compression resistance, and is suitable for heavy-load scenarios such as long-span bridges and high-rise building frames.
- Processing flexibility：Supports cutting (flame, laser), welding (requires low-hydrogen welding rods), cold bending and other processes to meet the needs of complex structures.
The surface can be galvanized or coated to improve corrosion resistance (such as zinc layer thickness 80-150μm).
- Economical efficiency and certification：Compared with European and American standard products (such as ASTM A36), JIS G3192 H Beam has cost advantages and meets international engineering acceptance standards (such as EN 10204 3.1 certificate).
Application
Construction Engineering
Industrial plant trusses, stadium roof supports.
Core structures of high-rise buildings, excellent earthquake resistance.
Machinery and Energy
Heavy equipment bases, wind power towers.
Ship structures, port machinery frames.
Special Environments
Corrosion-resistant scenes such as offshore platforms and chemical plants (need to cooperate with galvanizing process)
Physical Properties
A992 H-shaped steel is available in a variety of sizes that conform to standard sizes outlined in the American Institute of Steel Construction (AISC) manual. Typical dimensions include:
Web Width: 42 - 215 mm (for IPE beams) or wider (for wide flange (W) sections)
Depth: 80 - 600 mm or greater, depending on the specific profile
Web Thickness: 3.8 - 21.6 mm
Flange Thickness: Varies depending on size
Length: Typically 8-20 feet (2.44-6.1 meters), but custom lengths are available
GNEE is available in black (rolled), galvanized, or primed finishes, depending on environmental exposure and project requirements.
| Model Number |
Q235B/C/D Q345B/C/D/E Q390B/C/D/E Q420B/C/D/E Q460/C/D/E Q500/C/D/E SS400 SM490A/B SN400A/B SN490B S235JR/J0 S275JR/J0/J2 S355JR/J0/J2 S355K2 S450J0 S355M/L S460M S355J0WP/J2WP S355J0W/J2W/K2W |
| Application | Industry/Chemical Equipment |
| Welding Line Type | Welding |
| Processing Service | Bending, Punching, Cutting, Moulding |
| Length | 6000mm 9000mm 12000mm or Customized |
| Technique | Hot Rolled Cold Rolled |
| Payment terms | L/C T/T (30%DEPOSIT) |
| Process method | Standard |
GNEE Steel H Beam Steel Manufacturer
GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.
