S355M Hot Rolled Carbon Steel H Beam

S355M hot rolled carbon steel H-beam is a high strength, low alloy structural steel product widely used in construction, engineering and industrial applications.

S355M carbon steel H-beam falls under the EN 10025-4 standard, which specifies the technical delivery conditions for thermomechanically rolled weldable fine grain structural steels. The "S" in S355M stands for structural steel, the "355" stands for a minimum yield strength of 355 MPa, and the "M" stands for the fact that it is produced by a thermomechanical rolling process, which improves mechanical properties and weldability.

S355M H-beam is produced by hot rolling followed by thermomechanical treatment. The process involves:
Heating: The steel plate is heated to a high temperature (approximately 1100–1250°C).
Rolling: The slab is formed into an H-shaped profile by rolling rollers, and the rolling temperature is controlled to refine the grain structure.
Cooling: The beams are cooled under specific conditions to optimize their mechanical properties.
This method ensures uniform cross-sections, high dimensional accuracy and enhanced performance compared to conventional hot-rolled steel beams.

Advantages of S355M Hot-Rolled H-Beams
High Strength: The minimum yield strength of 355 MPa supports heavy loads.
Weldability: Low carbon equivalent values ​​ensure easy welding without preheating in most cases.
Toughness: Excellent impact resistance at sub-zero temperatures (-20°C or lower).
Cost-Effectiveness: Provides a balance of performance and affordability for large projects.
Sustainability: Thermomechanical rolling reduces energy consumption compared to standardized steel production.

Comparison with other grades
S355J2 (EN 10025-2): Due to thermomechanical rolling, S355M has better toughness and weldability, while S355J2 is normalized or rolled.
S275M: Has a lower yield strength (275 MPa) than S355M, making the latter suitable for more demanding applications.
S420M: Has higher strength (420 MPa), but may have lower ductility than S355M, depending on the application.

GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.