S460M H Section Steel

S460M H-beam is a hot-rolled high-strength structural steel H-beam specified in the European standard EN 10025-4. "S" stands for structural steel, "460" means the minimum yield strength is 460 MPa, and "M" stands for thermomechanical rolling.

Dimensions of S460M h beam structure

Dimension range: Common dimensions are expressed as "H height × B width × T web thickness × R bending radius", such as 200 × 100 × 6 × 8, 300 × 150 × 8 × 10, etc.

Length: Usually 6m, 12m or can be customized according to requirements.

S460M h beam steel structure production process provided by GNEE

Thermomechanical rolling: We mainly use thermomechanical rolling process to heat the steel billet to high temperature, and then carry out precise rolling and deformation control, combining the effects of rolling and heat treatment to refine the grain structure of the steel and improve the mechanical properties of the steel.
Quality control: We carry out strict quality control during the production process, including chemical composition analysis, mechanical properties testing, dimensional inspection, etc., to ensure product quality and performance stability.

Advantages of S460M h shaped iron beam

High strength: It has high yield strength and tensile strength. While meeting the requirements of large bearing capacity, it can effectively reduce the deadweight of the structure and is suitable for large span and high load projects.

Good toughness and ductility: It has good toughness and ductility, can withstand large deformation without brittle fracture, and has good impact and vibration resistance.

Good cold and hot formability: It can be formed by cold or hot processing, such as bending, stretching, etc., to meet the needs of different shapes and structures in the project.

What surface treatment can GNEE provide for S460M h shaped steel beam?

Galvanizing: It can be hot-dip galvanized to form a dense galvanized layer on the surface, improve the corrosion resistance of H-shaped steel, and extend its service life in outdoor and humid environments.

Painting: Apply anti-corrosion paint or other coatings to protect the surface of H-shaped steel from corrosion, wear and chemical erosion.

GNEE Steel was established in 2008. Strict quality control system and perfect after-sales service system are our primary concerns, which can guarantee and track the quality of our products from raw material procurement, production process, finished products and after-sales service.