Basic Info.
| Product Name | Q345B Structural carbon Steel H Beams in warehouse |
| Material | Q235~Q345/SS440~SS540/S235JR/JIS G3192/BS EN 10034/ASTM A6, A36/ST52 |
| Hight | 100-900mm |
| Width | 100-408mm |
| Thickness | t1: 6-21mm, t2: 8-35mm |
| Length | 6~12m |
| Technique | Hot rolled |
| Application | Steel structure/building material/construction/Bridges/vehicles/brackets/machinery, etc. |
Product Parameters
| H beam Section size (mm) | |||
Height×Breadth | Web thickness | Flange thickness | Weight (kg/m) |
100×100 | 6 | 8 | 16.9 |
125×125 | 6.5 | 9 | 23.6 |
150×150 | 7 | 10 | 31.1 |
175×175 | 7.5 | 11 | 40.4 |
200×200 | 8 | 12 | 49.9 |
250×250 | 9 | 14 | 71.8 |
300×300 | 10 | 15 | 93.0 |
300×300 | 15 | 15 | 105.0 |
350×350 | 12 | 19 | 134.9 |
400×400 | 13 | 21 | 171.7 |
148×100 | 6 | 9 | 20.7 |
194×150 | 6 | 9 | 29.9 |
244×175 | 7 | 11 | 43.6 |
294×200 | 8 | 12 | 55.8 |
340×250 | 9 | 14 | 78.1 |
390×300 | 10 | 16 | 104.6 |
440×300 | 11 | 18 | 120.8 |
482×300 | 11 | 15 | 110.8 |
488×300 | 11 | 18 | 124.9 |
582×300 | 12 | 17 | 132.8 |
588×300 | 12 | 20 | 147.0 |
100×50 | 5 | 7 | 9.3 |
125×60 | 6 | 8 | 13.1 |
150×75 | 5 | 7 | 14.0 |
175×90 | 5 | 8 | 18.0 |
198×99 | 4.5 | 7 | 17.8 |
200×100 | 5.5 | 8 | 20.9 |
248×124 | 5 | 8 | 25.1 |
250×125 | 6 | 9 | 29.0 |
298×149 | 5.5 | 8 | 32.0 |
300×150 | 6.5 | 9 | 36.7 |
346×174 | 6 | 9 | 41.2 |
350×175 | 7 | 11 | 49.4 |
396×199 | 7 | 11 | 56.1 |
400×200 | 8 | 13 | 65.4 |
446×199 | 8 | 12 | 65.1 |
450×200 | 9 | 14 | 74.9 |
496×199 | 9 | 14 | 77.9 |
500×200 | 10 | 16 | 88.1 |
596×199 | 10 | 15 | 92.4 |
600×200 | 11 | 17 | 103.4 |
700×300 | 13 | 24 | 181.8 |
800×300 | 14 | 26 | 206.8 |
900×300 | 16 | 28 | 240.1 |
1.What are H-beams used for?
H-Beam can be used in the construction of buildings due to its ability to resist tension forces in compression or shear through its sides. The property of being able to withstand both tension and compression makes it ideal for building designs that require support for vertical loads such as cables or girders.
2.Which is stronger, H-beam or I-beam?
The cross-section of a H-beam has greater strength per unit area than the I-beam. This makes the H-beam an overall stronger beam with a decent strength-to-weight ratio. As H-beams have large surface areas, they're great for carrying heavy loads.
3.Is there an H-beam?
H shapes are the largest and heaviest beams available and can tolerate larger weight loads. They are sometimes called HP, H-Piles, or bearing piles, which stems from their use in underground foundation support (load bearing columns) for skyscrapers and other large buildings.
4.What is the difference between H-beam and W beam?
Cross-Section Shape: The most obvious difference between W-beams and H-beams is their cross-section shape. W-beams have a W-shaped cross-section, while H-beams have an H-shaped cross-section. Flange Width and Thickness: W-beams typically have wider flanges and thinner webs than H-beams.
5.What is the other name for H-beam?
Wide flange beam is also known as H-beam due to their distinctive shape, similar to a capital letter "H" when viewed at the cross section. This shape is very efficient for carrying loads of weight without bending.