ASTM A36 S235jr S275jr A572 A572 Ss400 Mild Carbon Iron Hot Rolled Equal Unequal Angle Steel Bar

Dec 30, 2025

Leave a message

Our comprehensive range of hot rolled mild carbon steel angle bars, available in equal and unequal L-shaped configurations, encompasses premium international grades including ASTM A36, ASTM A572, European EN series S235jr/S275jr, and Japanese JIS Ss400. Engineered to meet rigorous regional and global standards (ASTM, EN 10025-2, JIS G 3101), these angle bars are crafted from high-quality mild carbon steel with precisely controlled chemical compositions-optimized low carbon content, balanced manganese levels, and trace amounts of silicon, phosphorus, and sulfur. This formulation endows the products with exceptional mechanical properties, excellent workability, and structural integrity, making them versatile and reliable solutions for diverse industrial, commercial, and infrastructure construction applications.

Each grade within the lineup delivers tailored mechanical performance to suit varied load-bearing requirements. ASTM A36, a global staple in mild carbon steel, boasts a minimum yield strength of 250 MPa (36,000 psi) and tensile strength of 400-550 MPa (58,000-80,000 psi), with excellent ductility (minimum elongation 20%) and weldability. ASTM A572, a high-strength low-alloy grade, offers enhanced load capacity-Grade 50 (the most common variant) features 345 MPa minimum yield strength and 448-586 MPa tensile strength. European S235jr (235 MPa minimum yield strength, 360-510 MPa tensile strength) and S275jr (275 MPa minimum yield strength, 410-560 MPa tensile strength) provide graded strength for light to medium-duty applications. Japanese Ss400 (235 MPa minimum yield strength, 400-510 MPa tensile strength) balances strength and workability for general-purpose use. All grades exhibit superior weldability, compatible with standard welding methods (SMAW, GMAW, FCAW), facilitating seamless on-site fabrication.

The hot rolling manufacturing process (conducted at temperatures above 900°C, exceeding the steel's recrystallization point) is pivotal to the performance of these mild carbon steel angle bars. This process refines the grain structure, significantly enhancing toughness, impact resistance, and overall structural stability-critical for components subjected to static, dynamic, or cyclic loads. Available in both equal and unequal configurations, the angle bars cover a wide range of dimensions: equal-legged variants (e.g., 40×40×3, 80×80×6, 100×100×8 mm) for balanced load distribution; unequal-legged variants (e.g., 50×32×4, 100×75×6, 125×80×8 mm) for asymmetric load support. The hot rolling process ensures precise dimensional accuracy, consistent leg squareness, uniform thickness, and tight tolerances. The natural surface finish enables excellent adhesion for protective treatments (hot-dip galvanization, epoxy coating, powder coating), enhancing corrosion resistance and extending service life in harsh environments.

Thanks to their diverse grade options, dual configurations, and reliable performance, these hot rolled mild carbon steel angle bars are widely utilized across a broad spectrum of applications. They serve as core components in commercial building framing, industrial workshop bracing, residential construction, bridge supports, guardrail systems, storage racks, and mechanical equipment frames. The graded strength lineup allows engineers to optimize material selection: S235jr/Ss400/ASTM A36 for general construction; S275jr/ASTM A572 for medium to heavy-duty load-bearing. Stringent quality assurance protocols are implemented throughout production, including chemical composition analysis via optical emission spectrometry, mechanical property verification (tensile, yield, elongation tests), dimensional inspection with precision tools, and surface defect detection. These measures ensure full compliance with respective standards and consistent performance across every batch. For professionals seeking high-quality, multi-standard mild carbon steel angle bars with versatile configurations, our product lineup offers unparalleled adaptability and reliability.

Product Name

Carbon steel angle bar

Standard

AiSi, ASTM, bs, DIN, GB, JIS

Grade

S235JR-S335JR Series,St-37/52,Q195-Q420,etc.Q235/Q345/SS400/ST37-2/ST52/Q420/Q460/S235JR

Size

20*20mm*3mm-200*200mm*20mm

Thickness

3-20mm

Length

5.8m,6m.9m,12m ,as customer's required

Delivery terms

FOB,CFR,CIF,CNF etc.

Brand

Taihang

Exported Area

USA,UAE,Europe,Asia,Middle East,Africa,South America or other areas.

Lead Time

A.7 days if this goods is stock goods.B.20 days if this goods will be produced after order

Remark

Specific requirement of alloy grade,temper or specification can be discussed at your request

 

 

angle steel

angle steel

angle steel