Product Description
Galvanized Carbon Steel L Angle Beam Lintel for Steel Structure
Hot rolled galvanised steel AGLE BARS :
Size: 25*25*3mm to 200*200*10mm, Cut Lengths:900mm-12000mm
Cold bending galvanised steel lintels:
Size: 150*100*6mm to 225*100*12mm, Lengths:900mm-12000mm
Ribbed galvanised steel lintels :
Size: 100*100*6mm to 150*100*6mm, Lengths:900mm-12000mm
OEM services:
Pre cutting to lengths as requirements
Drilling or punch holes as drawings
Prime painting or hot dipped galvanised meet standard AS/NZS 4680,600g/m2
We also supply :
Flat bars :
Hot rolled Galvanised flat bar 85 X 7 mm
Hot rolled Galvanised flat bar 75 X 10 mm
Hot rolled Galvanised flat bar 50 X 20 mm
T bars:
Weld and galvanized T bars:
200 X6+200 X6mm various lengths as request
200 X8+200 X6mm various lengths as request
200 X10+200 X10mm various lengths as request
250 X12+200 X10mm various lengths as request
Detailed Photos
Product Description
Angle steel belongs to the construction of carbon structural steel, is a simple section of steel steel, mainly used for metal components and workshop frame. Good weldability, plastic deformation and mechanical strength are required in use.
The angle steel can be composed of various stress-bearing components according to the different needs of the structure, and can also be used as a connection between the components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, busbar support installation, and warehouses Shelves etc.
1.What is angle steel?
Steel angle, also named angle iron, or steel angle bar, is basically manufactured by hot-rolled carbon steel or high strength low alloy steel. It has L-cross shaped section with two legs - equal or unequal and the angle would be 90 degree.
2.Is angle steel rust resistant?
Mild steel angle is strong and affordable but needs protection against rust. Aluminium angle is lightweight, corrosion-resistant, and easy to work with. Brass angle is decorative and corrosion-resistant but softer and more expensive. Galvanised steel angle is tough and highly rust-resistant, ideal for outdoor use.
3.How to calculate angle formula?
Angles Formulas at the center of a circle can be expressed as, Central angle, θ = (Arc length × 360º)/(2πr) degrees or Central angle, θ = Arc length/r radians, where r is the radius of the circle.
4.What are the disadvantages of using angle steel?
Angle steel often faces surface-related issues such as burrs, scales, rust, and other contaminants. These problems not only detract from the steel's appearance but also shorten its service life by promoting corrosion and weakening the material over time.
5.What steel will never rust?
Stainless steel
Stainless steels containing high enough chromium levels do not rust, as the chromium will oxidise far quicker than iron, creating a chromium oxide layer and preventing the formation of rust. The addition of nickel further enhances a stainless steel alloys rust-proof qualities.