Detailed Photos
Product Parameters
| Product name | H - shaped Steel |
| Specification | customizable |
| Apply | Shipbuilding/Construction/Maritime |
| Processing service | Bending, welding, punching, cutting |
| Transport type | Container or bulk carrier transport |
Product Description
Name: Channel Steel
Purpose: Channel steel has good load-bearing performance and is suitable for base steel frames of materials and components with relatively large self-weight.
Name:Angle Steel
Purpose: It is used in places where steel structure connection is required, and is generally used as a connector between steel and floor.
Name: C - shaped Steel
Purpose: As a light steel structure material, C-shaped steel is usually used as load-bearing components such as beams and columns in building structures. It can also be used to support and frame non-load-bearing components such as ceilings, walls, and roofs. It can be used to make bases and brackets for equipment such as machinery and equipment, conveyor belts, etc. It is used in the skeleton structure of mezzanine partitions to fix and support mezzanine panels or other building buffer materials. C-shaped steel is mainly used in steel structure workshops as purlins to support roof panels and wall panels.
Name: High - frequency Welded H - shaped Steel
Purpose: Since all parts of the H-shaped steel are arranged at right angles, it has the advantages of strong bending resistance in all directions, simple construction, cost savings and light structural weight, and has been widely used.
Name: Circular Pipe
Purpose: The application range of round tubes is very wide, and they are often used in mechanical structure, industry, etc.
Name: Square Pipe
Purpose: Square tubes are often used in building beams, beams and frames. They have high load-bearing capacity and can provide good support.
1.What is the purpose of the I beam?
I beams are usually the critical support trusses in structural steel construction. I beams are almost always used in the construction of large structures, such as warehouses and large buildings.
2.Why is the I-beam so strong?
I-beam is stronger in bending than H-beam because its flanges provide resistance against the load and support each other when the beam bends. The flanges of an H-beam don't have this advantage, so they tend to buckle under high loads and fail more easily under bending stress.
3.Which is stronger, an I or H-beam?
H-beam: An H-beam has a thicker center web, which means it is often stronger. I-beam: An I-beam often has a thinner center web, which means it is often not able to take as much force as an H-beam.
4.What are the benefits of using I-beams?
The strength of I-beams is derived from the flanges, which prevent bending, and the web, which resists force. The unique shape of I-beams allows them to offer maximum weight support with minimal materials. It's easy to understand, therefore, why they are so versatile across industries.
5.How much weight can an I-beam support?
The dimensions you choose will determine the weight capacity of your i-beam. For example, an i-beam with a depth of section of 5 inches, a flange width of 3 inches, and a flange thickness of 0.326 inches can bear 10 pounds per foot.