Product Description
H-shaped steel is an economical and efficient section with more optimized section area distribution and a more reasonable strength-weight ratio. It is named because its section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has been widely used for its advantages of strong bending resistance, simple construction, cost-saving, and light structural weight in all directions. Its characteristics are as follows:
1. Wide flange and large lateral stiffness.
2. Strong bending resistance, about 5% - 10% higher than I-beam.
3. The two surfaces of the flange are parallel to each other, making the connection, processing, and installation simple.
4. Compared with welded I-beam, it has the advantages of low cost, high accuracy, low residual stress, no need for expensive welding materials and weld detection, and can save about 30% of steel structure manufacturing cost.
5. Under the same section load, the weight of the hot-rolled H steel structure is 15% - 20% less than that of the traditional steel structure.
6. Compared with the concrete structure, the hot-rolled H steel structure can increase the service area by 6%, while the dead weight of the structure can be reduced by 20% - 30%, reducing the design internal force of
the structure.
7. H-shaped steel can be processed into T-shaped steel and honeycomb beams can be combined to form various cross sections, which greatly meet the requirements of engineering design and production.
|
Product Name |
H beam |
|
|
1. Web Width (H): 100-900mm |
|
Length |
1m - 12m, or according to your requests. |
|
Standard |
GB ASTM, JIS, SUS, DIN, EN etc |
|
Material |
Q235B Q345B Q420C Q460C SS400 SS540 S235 S275 S355 A36 A572 G50 G60 |
|
Technique |
Hot rolled |
|
Application |
Construction structure |
|
Price Item |
FOB, CIF, DDU, FCA, EXW, etc |
|
Packing |
Export standard packing or according to customers' requirement |
|
Supply Ability |
Within10-15 workdays,25-30days when the quantity beyond 1000tons |
Detailed Photos
Company Profile
Application
1.What is H-beam?
An H beam is shaped like the letter "H" with one vertical flange and two long-side flanges, whereas an I beam has a cross-section that resembles the letter "I" with a single vertical web or web thickest at mid-span, two webs, and no bottom flange.
2.Which is stronger, H or I-beam?
Though I-beams can prevent local buckling, they will not be able to handle the same force as an H-beam due to their lighter design. Overall, the title of "Stronger Beam" goes to H-beams.
3.What is the difference between H and W beam?
In general, W-beams are ideal for projects that require strong horizontal support, such as bridges and buildings with large open floor plans. H-beams, on the other hand, are ideal for projects that require strong vertical support, such as high-rise buildings and other structures with multiple levels.
4.Where are H-beams used?
An H Beam is a steel structure shaped like the letter "H." It is commonly used in construction to support heavy loads and strengthen buildings. This beam has wide flanges and a uniform design, making it suitable for homes, bridges, and industrial projects.
5.How thick are H beams?
H-Section Steel Beams are available in a range of sizes with widths between 4"-16" (10.2–40.6 cm), depths from 4"-16" (10.2–40.6 cm), and shared thicknesses between . 35"-. 83" (9-21 mm).