Product Description
Angle joint plate, also known as Angle iron, is vertical to each other on both sides of the angular steel strip.
Angle steel has equal Angle and unequal Angle.
The two sides of an equilateral Angle are equal in width.Angle steel is widely used in various building structures and engineering structures, such as beam, bridge, transmission tower,lifting machinery, ships, industrial furnaces, reaction towers, container racks and warehouses.
Product Parameters
| Equal Angle |
| Specification(mm) | Theoretical weight(kg/m) | Specification(mm) | Theoretical weight(kg/m) |
| 25*25*2.5 | 0.98 | 90*90*7 | 9.59 |
| 25*25*3 | 1.12 | 90*90*8 | 10.90 |
| 30*30*2.5 | 1.17 | 90*90*9 | 9.59 |
| 30*30*3 | 1.36 | 90*90*10 | 13.30 |
| 30*30*4 | 1.78 | 100*100*6 | 9.22 |
| 30*30*5 | 2.16 | 100*100*7 | 10.70 |
| 38*38*3 | 1.72 | 100*100*8 | 12.1 |
| 38*38*4 | 2.26 | 100*100*10 | 14.90 |
| 40*40*3 | 1.83 | 100*100*12 | 17.90 |
| 40*40*4 | 2.41 | 100*100*13 | 19.10 |
| 40*40*5 | 2.92 | 110*110*7 | 11.92 |
| 40*40*6 | 3.50 | 110*110*8 | 13.47 |
| 45*45*4 | 2.74 | 110*110*10 | 16.69 |
| 45*45*5 | 3.38 | 125*125*8 | 15.51 |
| 50*50*3 | 2.33 | 125*125*10 | 19.14 |
| 50*50*4 | 3.06 | 125*125*12 | 22.70 |
| 50*50*5 | 3.77 | 130*130*9 | 17.90 |
| 50*50*6 | 4.43 | 130*130*10 | 19.70 |
| 50*50*8 | 5.82 | 130*130*12 | 23.40 |
| 55*55*5 | 4.17 |
1.What is an angle bar?
Angle bars, also known as an "L-bracket" or an "angle iron, are commonly manufactured by hot-rolled carbon steel or high strength low alloy steel. An angle bar has L-cross shaped section with two legs - equal or unequal and the angle would be 90 degree.
2.Which is stronger, a tubular or angle bar?
Weight to Strength Ratio
If you ever get into a bending situation, angle iron will tend buckle the top rail (the top section of vertical material) because it is not designed to handle the load, in buckling so much. Whereas the tube can handle buckling better because it has the whole vertical section supported.
3.What is another name for an angle bar?
Steel angle, otherwise known as lintel, angle bar, angle iron or metal angle, is steel that's bent or rolled to form a 90 degree or L-shaped cross-section.
4.What is angle of used for?
The term angle is used to denote both geometric figures and their size or magnitude. Angular measure or measure of angle are sometimes used to distinguish between the measurement and figure itself.
5.Can angle bars be cut or welded?
You can either cut or clean an angle joint before welding with an angle grinder.