Product Description
Product Description
H-section steel is a kind of economical section and high-efficiency section with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its section is the same as the English letter "H". Since the various parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance, simple construction, cost saving and light structure weight in all directions, and has been widely used.
An economical cross-section profile with a cross-sectional shape similar to the capital Latin letter H, also called universal steel beam, wide-edge (side) I-beam or parallel-flange I-beam. The cross section of H-beam usually includes two parts: web and flange, also called waist and edge.
The inner and outer sides of the H-shaped steel flange are parallel or close to parallel, and the flange ends are at right angles, hence the name Parallel Flange I-beam. The thickness of the web of the H-beam is smaller than that of the ordinary I-beam with the same height of the web, and the flange width is larger than that of the ordinary I-beam with the same height of the web, so it is also called the wide-edge I-beam.
Product Parameters
Detailed Photos
Application
Packaging & Shipping
1.What kind of steel is an I-beam?
structural steel
I-beams are commonly made of structural steel but may also be formed from aluminium or other materials. A common type of I-beam is the rolled steel joist (RSJ), sometimes incorrectly rendered as reinforced steel joist. British and European standards also specify Universal Beams (UBs) and Universal Columns (UCs)
2.Are I-beam and H-beam the same?
An H-beam has flanges at the top and bottom that extend further from the web than those of an I-beam. Though an I-beam also has top and bottom flanges, they're not as wide as an H-beam's flanges. They're also shorter than an H-beam's flanges.
3.What is the I-beam?
I beam is a shape of structural steel used in buildings and it is also known as H, W, wide, universal beam, or rolled joist. They are designed to play a key role as a support member in structures. These beams have the capacity to withstand various types of loads.
4.Which is stronger, H-beam or I-beam?
To short, the main difference between an H-beam and an I-beam is that the web of an H-beam is much thicker than that of an I-beam. A thicker web means a stronger beam, which allows for more load-bearing capacity. This means that for the same amount of structural support, you can use fewer H beams than I beams.
5.Which is more expensive, H-beam or I-beam?
Cost and Material Considerations
H-beams are more material and therefore more expensive but are stronger structurally. Since I-beams are lighter and use less material, they are often preferred where cost savings are needed, provided that strength may not be needing to balanced.