|
Item |
Aluminium Alloy Bar/Rod |
|
Standard |
GB/T3190-1996,AA/UNS,JIS H4000-1988,DIN 1725.1-1986/W-Nr.,BS "L",NF A50-411 NF A50-451,ISO 209.1-1989 ,EN 573-3-1994 etc |
Grade |
1000 Series: 1050, 1060, 1070, 1100, 1200, 1235, etc. 2000 Series: 2014, 2024, etc. 3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc. 4000 Series: 4045, 4047, 4343, etc. 5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5454, 5754, 5A06, etc. 6000 Series: 6061, 6063, 6082, 6A02, etc. 7000series: 7003,7005,7050,7075,ect 8000series: 8011, etc. |
|
Temper |
O,H24,H32,H111,H112 etc |
|
Shape |
Round,Rectangular,Square,Hexangular,Triangle,etc. |
|
Dimension |
General Diameter:3mm-500mm; General Length: 1m--6m; Customized size is also welcomed. |
|
Technique |
Cold draw,Extruded etc. |
|
Surface Treatment |
Mill Finish or as customers' request |
| Quality Control | Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
|
Application |
1.Aviation aluminum. 2.building material. 3.Architectural appearance ,outdoor design.
4.Indoor decoration: ceiling,, picture frame,etc.5.Furniture, cabinet. 6.Elevator,lift,electric lift. 7.Car interior decoration. 8.Indoor decorations 9.Household appliances: refrigerator, microwave oven, audio equipment, etc. 10.Aerospace and military aspect,aircraft manufacturing, the Shenzhou spacecraft 11.Part and mound making. |
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.15 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.03 | 0.03 | 0.15 | 99.6 |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | 0.04 | 0.03 | 0.15 | 99.7 |
| 1100 | 0.95 Si + Fe | 0.05-0.20 | 0.05 | - | - | 0.1 | - | 0.15 | 99 | |
| 2011 | 0.4 | 0.7 | 5.0-6.0 | 0.20-0.60 | - | 0.3 | - | 0.15 | Remaining | |
| 2014 | 0.5-1.2 | 0.5 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 | 0.15 | 0.15 | Remaining |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.30-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | 0.15 | Remaining |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | 0.1 | - | 0.15 | Remaining |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | 0.25 | - | 0.15 | Remaining |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.20-0.6 | 0.1 | 0.25 | 0.1 | 0.15 | Remaining |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.15 | Remaining |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50-1.1 | 0.1 | 0.25 | - | 0.15 | Remaining |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | 0.15 | Remaining |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.15 | Remaining |
| 5252 | 0.08 | 0.1 | 0.1 | 0.1 | 2.2-2.8 | - | 0.05 | - | 0.1 | Remaining |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.15 | Remaining |
| 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Remaining |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | 0.15 | Remaining |
Mechanical properties
|
Alloy |
Temper |
Tensile Strength |
Yield Strength |
Elongation (%) |
Tensile Strength |
Yield Strength |
|
|
|
(ksi) |
(ksi) |
0.01-0.05 in |
0.051-0.125 in |
(MPa) |
(MPa) |
|
|
|
H12 |
16 |
15 |
4 |
12 |
110.3 |
103.4 |
|
H14 |
18 |
17 |
3 |
10 |
124.1 |
117.2 |
|
|
|
H12 |
19 |
18 |
9 |
11 |
131 |
124.1 |
|
H14 |
22 |
21 |
3 |
7 |
151.7 |
144.8 |
|
|
|
H32 |
31 |
25 |
6 |
15 |
213.7 |
172.4 |
|
H34 |
35 |
29 |
5 |
10 |
241.3 |
199.9 |
|
|
|
H12 |
26 |
24 |
5 |
13 |
179.3 |
165.5 |
|
H14 |
29 |
28 |
4 |
9 |
199.9 |
193.1 |
|
|
|
H12 |
20 |
19 |
5 |
9 |
137.9 |
131 |
|
H14 |
23 |
22 |
4 |
7 |
158.6 |
151.7 |
|
|
|
H32 |
33 |
28 |
7 |
10 |
227.5 |
193.1 |
|
H34 |
38 |
31 |
6 |
8 |
262 |
213.7 |
|
|
|
O |
42 |
22 |
23 |
24 |
289.6 |
151.7 |
|
H38 |
60 |
50 |
6 |
13 |
413.7 |
344.7 |
|
|
|
T4 |
35 |
21 |
22 |
24 |
241.3 |
144.8 |
|
T6 |
45 |
40 |
12 |
17 |
310.3 |
275.8 |
|
|
|
O |
33 |
15 |
16 |
18 |
227.5 |
103.4 |
|
T6 |
83 |
73 |
11 |
12 |
572.3 |
503.3 |
|
1.Is aluminum alloy good quality?
Aluminum naturally forms a protective oxide layer, which enhances its resistance to corrosion, making it an ideal choice for industries such as marine, automotive, and construction
2.What is an aluminum bar?
is an extruded aluminum product that is very versatile and has a wide range of applications. 6061 Aluminum bar is made from one of the most widely used heat treatable aluminum alloys. It has excellent corrosion resistance, good workability and good machinability.
3.How do I know if my aluminum is 5052 or 6061?
Aluminum 5052 has a smoother finish than 6061, although it is not heat-treatable. Aluminum 5052 has a higher fatigue strength and modulus of elasticity than Aluminum 6061, making it an excellent forming alloy. Additional aluminum alloy 5052 characteristics include: Non-heat treatable.
4.Which is better, aluminium or aluminium alloy?
Aluminium is a pure metal, while an alloy is a mixture of metals. Aluminium is lightweight and strong, while an alloy is even stronger. Aluminium is corrosion-resistant, while an alloy is even more resistant. Aluminium is easy to recycle, while an alloy can be more difficult.
5.Is Al stronger than steel?
Strength is often one of the first properties considered when selecting a material, especially in high-stress applications. Generally speaking, steel is stronger than aluminum.