Cold Rolled Steel Coil SPCC-SD for Precision Stamping and Forming

Jan 08, 2026

Leave a message

What Cold Rolled Steel Coil Is

Cold rolled steel coil is produced by taking hot-rolled strip and further reducing its thickness at room temperature through a cold rolling mill. The process improves the surface finish, thickness accuracy and mechanical consistency of the steel, making it the preferred material for parts that require a smooth appearance and precise dimensions.

The SPCC-SD Grade

SPCC is the commercial cold rolled steel grade defined in JIS G3141, with good forming properties and a clean surface. The suffix SD denotes the specified dull matte surface finish, which holds paint and coatings well and is widely used for automotive panels, appliances and general stampings. The steel is available in coils and sheets in a range of thicknesses.

Production and Surface Quality

The coil is cleaned and annealed after cold rolling to restore formability, then skin passed to control flatness and surface texture. The result is a consistent product with uniform thickness, good drawability and a surface ready for painting, plating or further processing.

Related Wear-Resistant Coils

For components that face heavy abrasion, hot-rolled high-strength sheet in coil is also available, including wear-resistant grades such as NM400 and NM500 supplied in coil form. These grades combine high hardness with the convenience of coil processing for manufacturing liners and wear parts.

Applications

Automotive body panels and structural stampings.

Home appliance housings, liners and brackets.

Electrical enclosures, office furniture and shelving.

Steel drums, containers and general fabrication.

Wear-resistant liners and heavy-duty components from hot-rolled coil.

Frequently Asked Questions

Q: What does SPCC stand for?
SPCC is the JIS G3141 designation for commercial cold rolled steel sheet and strip with good forming properties.

Q: What does the suffix SD mean?
The suffix SD indicates the specified dull matte surface finish, which provides a good base for painting and coating.

Q: What thickness range is available?
Cold rolled coil is commonly supplied in thicknesses from about 0.3 mm to 3.0 mm, with wider ranges available on request.

Q: Can the coil be slit to narrow widths?
Yes, coils can be slit to specified widths before delivery to match the stamping or forming line.

Q: Are material certificates provided?
Yes, mill test certificates confirming the chemical composition and mechanical properties are supplied with each coil.