Product Description
Profile Steel
H-section steel is a kind of economical section and high-efficiency section with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its section is the same as the English letter "H". Since the various parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance, simple construction, cost saving and light structure weight in all directions, and has been widely used.
Channel steel is a long strip of steel with a groove-shaped cross-section. It is a carbon structural steel for construction and machinery. It is a section steel with a complex section and its cross-section is a groove-shaped. In use, it is required to have good welding, riveting performance and comprehensive mechanical properties. The raw material billets for channel steel are carbon steel or low-alloy steel billets with a carbon content of not more than 0.25%. The finished channel steel is delivered after hot forming, normalizing or hot rolling. Channel steel is mainly used in building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.
Angle steel, commonly known as angle iron, is a long strip of steel whose two sides are perpendicular to each other and form an angle. The angle steel can be composed of various stress-bearing members according to the different needs of the structure, and can also be used as the connection between the members. Widely used in various building structures and engineering structures, such as building beams, bridges, power transmission towers, lifting and transporting machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, busbar support installation, and warehouses Shelves and so on.
Angle steel is a carbon structural steel for construction. It is a section steel with a simple section. It is mainly used for metal components and the frame of factory buildings. In use, it requires good weldability, plastic deformation performance and certain mechanical strength. The raw material billets for the production of angle steel are low-carbon square billets, and the finished angle steel is delivered in a hot-rolled, normalized or hot-rolled state.
More Profile Steel Products
Application |
|---|
1.What is a steel H-beam?
An h-beam is a steel structure that looks like its name suggests it should look: It's a steel beam shaped like a capital H. This structural beam made from rolled steel provides an impressive amount of strength when used in commercial building projects. Most of today's steel buildings use H-beams.
2.Is H or I-beam better?
The cross-section of a H-beam has greater strength per unit area than the I-beam. This makes the H-beam an overall stronger beam with a decent strength-to-weight ratio. As H-beams have large surface areas, they're great for carrying heavy loads.
3.What grade of steel is used in H beams?
Steel h-pile beams and steel wide flange beams come in eight ASTM standards, including A36, A572-Grade 50, A588, A690, A709, A913-Grade 50, A913-Grade 65, and A992. ASTM A36 mainly applies to carbon structural steel.
4.Is W beam the same as H-beam?
Similar to W beams, H beams have inner and outer flange surfaces that run parallel. However, in H beams the width of the flanges is approximately equal with the beam depth. The beam also displays an even thickness throughout. Beams serve as the basis for support in many constructions and engineering projects.
5.Why are H beams so strong?
H-beams have a thicker, deeper web, which means that they can better support the weight of an object placed on top of them. This also helps balance out any cantilevered loads that might be placed on an H-beam in the future (such as additional floors or beams).