High tensile S355JR channel steel and S355J2 channel steel

Dec 29, 2025

Leave a message

Both S355JR and S355J2 channel steel are high-strength structural steel grades under EN 10025-2, offering a minimum yield strength of 355 MPa and a tensile strength range of 470–630 MPa. The key difference lies in low-temperature performance:

 

S355JR

 

S355JR: Impact test performed at room temperature or sometimes not required.

S355J2: Impact test performed at -20°C, making it suitable for low-temperature applications.

 

Due to this, S355J2 channel steel is often referred to as low-temperature high-strength channel steel and is preferred for cold climate construction, offshore, or industrial applications.

 

Certification and Stock Availability

 

Our warehouse stocks ABS-certified S355J2 and S355JR channel steels in various dimensions, supplied with EN 10204 3.2 mill certificates. Additional third-party inspections are available, including:

BV (Bureau Veritas)

DNV-GL

CCS (China Classification Society)

TUV

LR (Lloyd's Register)

SGS

This ensures traceability, quality assurance, and compliance with international project requirements.

 

Chemical Composition Comparison (Max%)

 

StandardGradeCMnPSSiCuN
EN 10025-2S355JR0.241.600.0350.0350.550.550.012
EN 10025-2S355J20.201.600.0250.0250.550.55-

Note: S355J2 has stricter limits for C, P, and S to ensure better low-temperature toughness.

 

Mechanical Properties Comparison

 

StandardGradeThickness (T≤16mm)Yield Strength (MPa Min)Tensile Strength (MPa)
EN 10025-2S355JR≤16 mm355470–630
EN 10025-2S355J2≤16 mm355470–630

Both grades share similar yield and tensile strengths, but S355J2 is tested for low-temperature impact toughness, making it safer for cold environments.

 

S355JR channel steel – Standard high-strength channel steel for normal temperature applications.

S355J2 channel steel – Low-temperature high-strength channel steel, suitable for cold weather or offshore projects.

Both grades are fully certified and available in various dimensions, with third-party inspection options for quality assurance.

 

Contact now

 

info-800-1000

Q1: What is S355JR channel steel?

A:
S355JR channel steel is a low-alloy, hot-rolled structural steel produced according to EN 10025-2. It offers a minimum yield strength of 355 MPa and is widely used in construction, machinery, and general structural applications.

 

Q2: What standard does S355JR channel steel comply with?

A:
S355JR channel steel follows EN 10025-2:2004, which defines the technical delivery conditions for non-alloy structural steels. The standard ensures that mechanical properties, chemical composition, and quality are consistent across different production batches.

 

Q3: What are the typical mechanical properties of S355JR channel steel?

A:

Yield strength: ≥ 355 MPa

Tensile strength: 470–630 MPa

Elongation: ≥ 20% (depends on section size)
These properties provide a good balance of strength, ductility, and toughness for standard structural applications.

 

Q4: Does S355JR channel steel require impact testing?

A:
Yes. As a JR grade, S355JR is impact tested at 20°C (room temperature). This ensures adequate toughness for normal temperature applications, but it is not suitable for low-temperature environments.

 

Q5: How does S355JR differ from S355J2 channel steel?

A:
The main difference lies in low-temperature performance.

S355JR: Impact tested at 20°C, suitable for normal temperature conditions.

S355J2: Impact tested at -20°C, suitable for colder environments.
Other mechanical properties such as yield strength and tensile strength are similar.

 

Q6: Is S355JR channel steel weldable?

A:
Yes. S355JR has excellent weldability due to its low carbon content. Standard arc welding and gas welding are suitable. Preheating is generally not required for thin sections, but may be used for thicker sections to reduce residual stress.

 

Q7: What are the typical applications of S355JR channel steel?

A:

Structural frameworks for buildings and bridges

Support beams and columns

Machinery bases and chassis

General fabrication where moderate strength is sufficient

 

Q8: What size range is available for S355JR channel steel?

A:
S355JR channels are commonly available in heights from 80 mm to 300 mm and thicknesses from 5 mm to 20 mm, depending on the manufacturer. Custom lengths and cutting services can often be provided on request.

 

Q9: Can S355JR channel steel be cut or machined?

A:
Yes. It can be flame cut, sawed, drilled, or milled using standard tools and procedures. Its moderate hardness allows for easy processing without special equipment.

 

Q10: What inspection and certification are supplied with S355JR channel steel?

A:
Material is usually supplied with EN 10204 3.1 or 3.2 mill test certificates, covering chemical composition, mechanical properties, and dimensional verification. Additional testing, such as ultrasonic or magnetic particle inspection, can be provided for critical applications.