What a Hot Rolled Round Bar Is
A hot rolled round bar is a solid cylindrical steel product produced by rolling heated billets through shaped rolls. It is the raw material for machined shafts, pins, fasteners and forged parts, and its dimensions are defined by the diameter in millimeters.
The A26 Grade
A26 designates a carbon steel grade for general engineering bar service, with controlled carbon content for predictable strength and machinability. Dimensional tolerances for hot rolled round steel follow GB/T 702, which also defines the straightness and diameter limits for each size.
Standard Diameters and Supply
Round bar is available in a wide range of diameters from about 20 mm up to 300 mm, supplied in lengths of 6 m and 9 m or cut to order. The surface is cleaned of scale as required, and each bar can be verified for composition and hardness.
Machining and Forging
The grade is selected for turning, milling, drilling and forging. For machined parts the bar is used as supplied or after cold drawing for tighter tolerance, and for forging it is heated and formed to the required shape before machining and heat treatment.
Applications
Shafts, pins, bolts and machined components.
Forged blanks and engineering parts.
Anchors, tie rods and structural connectors.
General fabrication and machine shop stock.
Frequently Asked Questions
Q: What diameters of round bar are available?
Diameters typically range from about 20 mm to 300 mm, with other sizes available on request.
Q: Is A26 the same as A36?
A26 is a carbon steel bar designation for general engineering service, while A36 is a structural plate and section grade; the two are specified according to the application.
Q: Can the bar be cut to length?
Yes, bars are cut to the required length before delivery.
Q: Is the bar suitable for machining?
Yes, the carbon steel grade is machinable by turning, milling and drilling.
Q: Are test certificates available?
Yes, mill test certificates with chemical composition and mechanical properties are provided.



















