As a pivotal product in China's structural steel market, the hot-rolled mild carbon A35 SS400 equal steel angle integrates the reliable performance of two well-recognized mild carbon steel grades-A35 and SS400-with the precision of equal-leg (L-shaped) design and advanced hot-rolling technology. Tailored for diverse structural applications, this steel angle balances mechanical stability, workability, and cost-effectiveness, making it a preferred choice for engineers, contractors, and manufacturers seeking consistent, China-sourced structural components.
Core Material Properties: A35 & SS400 Mild Carbon Steel
Both A35 and SS400 belong to the mild carbon steel category, characterized by low carbon content (typically ≤0.25%) that endows them with exceptional ductility, weldability, and machinability-key attributes for structural fabrication.
A35 Steel: A widely used mild carbon grade known for its moderate strength and excellent formability. It features a nominal yield strength of approximately 235–250 MPa and a tensile strength range of 370–480 MPa, with an elongation rate of ≥26%. These properties ensure the material can withstand bending, cutting, and welding without cracking, making it suitable for non-high-stress structural roles.
SS400 Steel: A Japanese industrial standard (JIS G3101) grade, technically equivalent to China's Q235 and ASTM A36. It boasts a minimum yield strength of 235 MPa and a tensile strength of 400–510 MPa, paired with an elongation of ≥21%. Its robustness and compatibility with international standards make it a staple in global construction and manufacturing, ensuring seamless integration with multi-standard projects.
When combined in this steel angle, A35 and SS400's complementary properties result in a material that meets both general structural demands (via A35's formability) and mid-range load-bearing requirements (via SS400's strength), catering to a broad spectrum of application needs.
Hot-Rolling Process: Enhancing Performance & Precision
The steel angle is manufactured using the hot-rolling method-an industry-standard process for structural steel that involves shaping the material at temperatures above 900°C (exceeding its recrystallization point). This process delivers multiple performance and quality advantages:
Grain Structure Refinement: High-temperature rolling eliminates internal defects and aligns the steel's grain structure, enhancing toughness and reducing brittleness. This ensures the angle can withstand dynamic loads (e.g., wind, seismic activity) and long-term stress without premature failure.
Dimensional Accuracy: Hot rolling enables tight tolerances for the equal-leg profile-typical leg lengths range from 20mm to 200mm, with thickness tolerances of ±0.5mm and squareness deviations of ≤1.5°. The uniform leg length (e.g., 50×50mm, 100×100mm) ensures symmetric load distribution, a critical feature for structural stability in framing, bracing, and support applications.
Surface Quality: The process produces a smooth, oxide-free surface (when post-treated) that minimizes corrosion risk and simplifies secondary finishing (e.g., painting, galvanization).
Equal-Leg Design: Optimized for Structural Efficiency
The equal-leg (equal-angle) configuration is a defining feature of this product, engineered to maximize structural efficiency in symmetric applications:
Balanced Load Distribution: Identical leg lengths ensure even weight transfer across the angle's cross-section, making it ideal for framing joints, roof truss supports, floor joist bracing, and wall stud reinforcement-scenarios where uniform stress resistance is essential.
Ease of Installation: The symmetric design simplifies alignment during assembly, reducing on-site labor time and ensuring precise connections with other structural components (e.g., beams, columns, plates).
Material Efficiency: The L-shaped profile provides high stiffness relative to weight, minimizing material usage while maintaining load-bearing capacity-an eco-friendly and cost-effective advantage for large-scale projects.
Applications & Compatibility
This hot-rolled A35 SS400 equal steel angle, sourced from China's advanced steel manufacturing facilities, finds extensive use across sectors:
Construction: Used in residential/commercial building framing, bridge bracing, and precast concrete reinforcement; compatible with China's GB standards and international codes (e.g., JIS, ASTM) for cross-border projects.
Manufacturing: Serves as a framework component for machinery bases, storage racks, and equipment supports, leveraging its machinability for custom fabrication.
Infrastructure: Applied in highway guardrails, transmission tower brackets, and industrial warehouse structures, withstanding outdoor conditions when paired with surface treatments (e.g., hot-dip galvanization per GB/T 13912, epoxy coating).
Quality Assurance (Made in China)
Chinese manufacturers adhere to strict quality control protocols for this product, aligning with national (GB/T 9787 for equal angles) and international standards:
Testing: Each batch undergoes tensile/impact tests (to verify strength/ductility), spectrometric analysis (to confirm chemical composition), and laser dimensional inspection (to ensure profile accuracy).
Certifications: Compliance with ISO 9001 quality management systems and third-party certifications (e.g., SGS, BV) ensures consistency for global customers.
Supply Chain Reliability: China's mature steel production network enables stable bulk supply, with customizable leg lengths, thicknesses, and surface treatments to meet project-specific needs.
In summary, the hot-rolled mild carbon A35 SS400 equal steel angle from China embodies the synergy of trusted steel grades, precision design, and advanced manufacturing. It stands as a reliable, code-compliant solution for structural projects requiring workability, strength, and cost-effectiveness-backed by China's expertise in producing high-quality structural steel.
|
item |
value |
|
Standard |
GB |
|
Tolerance |
±1% |
|
Place of Origin |
China |
|
Alloy Or Not |
Non-Alloy |
|
Delivery Time |
8-14 days |
|
Invoicing |
by actual weight |
|
Materials |
Q235B,Q355B/C,Q420B/C,Q345BT/CT,Q420BT/CT |
|
Processing Service |
Bending, Welding, Punching, Cutting |
|
Shape |
Equilateral Angle Bar |
|
Keywords |
Angel Steel Bar |
|
Application |
Engineering Structure |
|
Technique |
Hot Rollled |
|
MOQ |
5 Tons |
|
Length |
6m-12m |
|
Package |
Standard Sea-worthy Packing |






















