Tailored for small-scale and temporary projects, this H-beam has a compact 150-400mm height and 2-6m length, avoiding waste from cutting long beams. Flange width is 80-180mm, and thicknesses (flange: 8-15mm; web: 6-10mm) suit light to medium loads (50-120kN). Made of Q235 carbon steel, it meets basic structural standards with tensile strength of 375-500MPa, ideal for non-permanent structures where cost and convenience matter. The unpainted surface allows on-site customization (e.g., painting or welding) to match existing structures. Advantages include low cost, easy storage (short length saves space), and quick installation. It is commonly used in construction scaffolding, temporary event stages, small workshop frames, and residential extensions, where customized short lengths reduce on-site labor and material waste.
Hot Rolled Customized Steel H Beam Structural Carbon Steel H Beam (400-1000mm Height, Thick Flange 25-60mm)
Built for super heavy-load scenarios, this H-beam has a 400-1000mm height and extra-thick flanges (25-60mm) to enhance bending resistance. Flange width is 200-400mm, and web thickness is 15-38mm, enabling it to bear 300-500kN loads-suitable for large-span structures. Constructed from Q355 carbon steel, it offers a yield strength of ≥345MPa and good fatigue resistance, handling repeated loads like bridge traffic or conveyor belts. The thick flange design distributes pressure evenly, reducing stress concentration at connections. Its key advantage is super load capacity: it eliminates the need for multiple beams, simplifying structural design. Applications include long-span bridges (span 20-50m), industrial plant main frames, high-rise building transfer beams, and mining equipment supports, where customized flange thicknesses and heights meet strict engineering requirements.
Hot Rolled Customized Steel H Beam Structural Carbon Steel H Beam (250-700mm Height, Epoxy-Coated Surface)
This H-beam is designed for chemical and corrosive environments, with a 250-700mm height range to fit industrial facilities. Its flange width is 120-280mm, and thicknesses (flange: 12-22mm; web: 8-15mm) balance strength and corrosion protection. The epoxy coating (60-100μm thick) is chemical-resistant, withstanding acids, alkalis, and solvents-ideal for chemical plants or wastewater treatment facilities. Made of Q345 carbon steel, it has a tensile strength of 510-650MPa, ensuring durability under harsh conditions. Advantages include superior chemical resistance (service life 30+ years) and low maintenance. It is used in chemical reactor supports, pharmaceutical factory steel frames, electroplating workshop structures, and oil refinery platforms, where customized dimensions adapt to equipment layouts and load demands.
Hot Rolled Customized Steel H Beam Structural Carbon Steel H Beam (120-350mm Height, Lightweight Web 5-9mm)
Focused on lightweight and cost-saving projects, this H-beam has a 120-350mm height and thin web (5-9mm) to reduce material use while maintaining strength. Flange width is 70-150mm, and flange thickness is 9-14mm, delivering a strength-to-weight ratio 10-15% higher than standard beams. Made of Q235 carbon steel, it meets light-load needs (40-80kN) with tensile strength of 375-500MPa. The hot-rolling process ensures good weldability, allowing easy on-site connections. Its main advantage is cost efficiency: the thin web cuts material costs by 8-12%. Applications include residential interior partitions, small warehouse mezzanines, retail store display frames, and light steel villas, where customized heights and lightweight design simplify installation and reduce structural weight.
