Hot Rolled ASTM A36 H-Beam for Building Construction

Jan 15, 2026

Leave a message

GBT706-2016Hot-Rolled-H-Beam.pdf

Why A36 H-Beams Are Standard

ASTM A36 is the most widely specified structural carbon steel in the world for building construction. Hot rolled H-beams in this grade combine adequate strength, excellent weldability and predictable behavior, which is why they are the default member for columns and beams in steel-framed buildings.

Properties of ASTM A36

A36 has a minimum yield strength of 250 MPa and a specified tensile range, with good ductility for forming and welding. It is suitable for bolted, riveted and welded construction and is available with a mill certificate confirming the mechanical test results.

The H-Beam Profile

The H-shaped cross-section with wide parallel flanges provides high stiffness in both directions, making the section efficient for columns, beams and bracing. The flat flange faces simplify connections to other members and to base plates.

Standard Sizes for Building Work

H-beams are available in standard sizes from about 100 mm to 900 mm in section height, covering the range used in building frames. Lengths of 6 m, 9 m and 12 m are standard, and members can be cut to the fabrication schedule.

Applications

Columns and beams of steel-framed buildings.

Portal frames, roof trusses and mezzanines.

Industrial workshops, warehouses and commercial structures.

Platforms, gantries and equipment supports.

Frequently Asked Questions

Q: What is the yield strength of A36?
A36 has a minimum yield strength of 250 MPa in the standard thickness range.

Q: Can A36 H-beams be welded?
Yes, A36 is readily weldable with standard procedures and consumables.

Q: What sizes are available?
Section heights range from about 100 mm to 900 mm in standard series.

Q: Can the beams be galvanized?
Yes, hot-dip galvanizing is available for outdoor and corrosive service.

Q: Are mill certificates supplied?
Yes, mill test certificates confirming mechanical properties are provided with each order.