Product Description
|
Product name |
Hot Rolled Angle Steel Bars |
|||||
|
Scope of sizes |
equal angles:20*20mm-200*200mm |
|||||
|
|
unequal angles: 25*16MM-200*125mm |
|||||
|
Thickness |
3mm~24mm |
|||||
|
Length |
6M/9M/12M, Or According To Customer Requirement |
|||||
|
Other processing service |
Hot dip Galvanized, Color Painting, Coated, Cutting, Bending,and ect |
|||||
|
Material |
Q235B,Q345B,SS400,S235JR/S235J0/S235J2,S275JR/S275J0/S275J2,S355JR |
|||||
|
Usage |
Mechanical & Manufacture, Steel strcuture, Shipbuilding, Bridging, Automobile Chassis. |
|||||
|
PAYMENT TERMS : |
1.100% irrevocable L/C at sight. |
|||||
|
Packing |
tied up with steel strips and wrapped with water proof paper |
|||||
|
Delivery Time |
Delivered within 15 days after the receipt of deposit |
|||||
|
|
||||||





Hot Products



1.What is angle steel?
Steel angle, also named angle iron, or steel angle bar, is basically manufactured by hot-rolled carbon steel or high strength low alloy steel. It has L-cross shaped section with two legs - equal or unequal and the angle would be 90 degree.
2.What is right angle steel called?
Steel angle, otherwise known as lintel, angle bar, angle iron or metal angle, is steel that's bent or rolled to form a 90 degree or L-shaped cross-section. Widely used in construction, steel angles are primarily used to provide structural support.
3.Why is it called an angle?
In Plane Geometry, a figure which is formed by two rays or lines that shares a common endpoint is called an angle. The word "angle" is derived from the Latin word "angulus", which means "corner".
4.Is angle iron strong?
Angle iron is a strong, lightweight product. Compared to other types of materials, including other structural steel products, other metals, or the equivalent amount of wood or composite materials to equal the strength of angle iron, it is relatively affordable for its strength and durability.
5.How to calculate angle weight?
Weight (kg/m) = (Width + Thickness) × Thickness × 0.00785 × 2)
Width = size of one leg (mm)
Thickness = leg thickness (mm)
0.00785 = density of mild steel (kg/mm³)



















