EN S355JR round bars (per EN 10025-2 and EN 10279) are dimensional equivalents to GB Q355B round bars (GB/T 702), with minor variances within tolerance limits-critical for applications like machine shafts, structural bracing, and heavy-duty fasteners.
Key Dimensional Comparisons (Common Sizes)
| EN S355JR Round Bar | Diameter (mm) | Tolerance | Weight (kg/m) | Section Area (mm²) | Corresponding GB Q355B Bar | Diameter (mm) | Tolerance | Weight (kg/m) | Section Area (mm²) | Dimensional Variance |
|---|---|---|---|---|---|---|---|---|---|---|
| Φ20 | 20 | ±0.3 mm | 2.47 | 314.2 | Φ20 | 20 | ±0.3 mm | 2.47 | 314.2 | None-identical |
| Φ50 | 50 | ±0.4 mm | 15.4 | 1963.5 | Φ50 | 50 | ±0.4 mm | 15.4 | 1963.5 | None-identical |
| Φ100 | 100 | ±0.5 mm | 61.7 | 7854.0 | Φ100 | 100 | ±0.5 mm | 61.7 | 7854.0 | None-identical |
| Φ150 | 150 | ±0.6 mm | 139.0 | 17671.5 | Φ150 | 150 | ±0.6 mm | 139.0 | 17671.5 | None-identical |
Practical Substitution Implications
Fitment: EN bars fit GB-compatible components without modification. A Φ50 S355JR bar slides into a GB bearing housing (designed for Φ50 Q355B) with no gaps, as the ±0.4 mm tolerance is identical.
Load Calculations: Section area is identical, so shear and tensile capacity calculations are interchangeable. A Φ100 S355JR bar supports ~350 kN tensile load (7854 mm² × 44.5 MPa allowable stress), same as GB Q355B.
Machining: No extra machining is needed-EN bars' straightness (≤1 mm/m) matches GB/T 702, so turning or grinding operations use the same tool paths and speeds.
This dimensional alignment eliminates barriers to substitution, making EN S355JR a drop-in replacement for GB Q355B.



















