Sulfur and phosphorus are considered detrimental impurities in flat steel, with strict limits typically set below 0.045% each. Sulfur forms iron sulfide (FeS), which has a low melting point (~1190°C) and accumulates at grain boundaries. During hot rolling, when steel reaches temperatures above 1200°C, FeS melts, causing "hot shortness"-a condition where the steel cracks under rolling pressure. This makes the material unworkable in hot forming processes. Phosphorus, on the other hand, segregates at grain boundaries and increases brittleness at ambient and sub-zero temperatures, a phenomenon known as "cold shortness." It reduces the material's impact toughness, making the flat steel prone to fracture during cold bending or machining. Modern steelmaking uses desulfurization and dephosphorization processes (such as ladle refining) to control these elements, ensuring the steel can withstand both hot rolling and cold forming operations without failure.



















