UPE/UPN web thicknesses are slightly thicker than GB C-profiles, enhancing shear capacity without compromising substitution:
Comparisons:
UPE 100 vs. GB C100x50x5: UPE 100 (5 mm web) vs. GB C100x50x5 (5 mm)-identical, same shear capacity.
UPE 200 vs. GB C200x75x7: UPE 200 (7 mm web) vs. GB C200x75x7 (7 mm)-identical, no load calculation changes.
UPN 300 vs. GB C300x90x10: UPN 300 (10.5 mm web) vs. GB C300x90x10 (10 mm)-0.5 mm thicker, increasing shear capacity by ~5% (beneficial for heavy loads).
Impact on Design: Thicker webs require slightly longer drill bits for bolt holes, but Chinese manufacturers use standard 150 mm bits that accommodate UPE/UPN thicknesses (up to 12 mm). Shear load calculations use the same formula (V = 0.6×Fy×Aw) for both EN and GB channels, with UPE/UPN's thicker webs providing a safety margin.
This web thickness alignment ensures UPE/UPN channels perform reliably in GB designs, with minor tool adjustments for fabrication.



















