316Ti stainless round steel (ASTM A276; GB 06Cr17Ni12Mo2Ti) has a composition of 16.0–18.0% chromium (Cr), 10.0–14.0% nickel (Ni), 2.0–3.0% molybdenum (Mo), 0.04–0.10% titanium (Ti), ≤0.08% carbon (C), ≤1.00% silicon (Si), ≤2.00% manganese (Mn), ≤0.045% P, ≤0.030% S.
Compared to 316L (no intentional Ti), 316Ti's titanium (0.04–0.10%) plays a critical role in high-temperature service by preventing carbide-induced degradation: At temperatures above 500°C, carbon in 316L reacts with chromium to form Cr₂₃C₆ carbides at grain boundaries, depleting chromium near boundaries and breaking down the passive Cr₂O₃ layer (intergranular corrosion). Titanium in 316Ti has a higher affinity for carbon than chromium-it reacts with carbon to form stable TiC carbides in the matrix, not at grain boundaries. This "traps" carbon, preventing it from migrating to boundaries and depleting chromium.
At high temperatures, TiC also resists coarsening better than Cr₂₃C₆, maintaining its ability to pin dislocations and strengthen the steel. This makes 316Ti suitable for service at 500–650°C, whereas 316L degrades above 450°C due to intergranular corrosion. Molybdenum and nickel function the same as in 316L, providing chloride resistance and austenite stabilization.



















