How does the chemical composition of 440C stainless round steel differ from 440B, and what chemical effects make it the hardest in the 440 series?​

Sep 17, 2025

Leave a message

 

440C stainless round steel (ASTM A276; GB 10Cr17Mo) has a composition of 0.95–1.20% carbon (C), 16.0–18.0% chromium (Cr), 0.75–1.25% molybdenum (Mo), ≤1.00% silicon (Si), ≤1.00% manganese (Mn), ≤0.040% P, ≤0.030% S.

Compared to 440B (0.75–0.95% C, 16.0–18.0% Cr, 0.40–0.60% Mo), 440C's higher carbon and molybdenum content make it the hardest in the 440 series:

Higher carbon (0.95–1.20% vs. 0.75–0.95%): More carbon reacts with chromium to form a significantly higher volume fraction of chromium carbides (Cr₇C₃ and Cr₂₃C₆). Carbides are the primary hardening phase in martensitic stainless steels-440C's carbide volume fraction is ~30%, compared to 440B's ~25%. This 5% increase translates to a 3–5 HRC hardness boost (58–60 HRC vs. 55–58 HRC).

Higher molybdenum (0.75–1.25% vs. 0.40–0.60%): Mo forms hard molybdenum carbides (Mo₂C) that are harder than chromium carbides (1800 HV vs. 1500 HV). These Mo₂C particles are dispersed among Cr-based carbides, creating a "hybrid" carbide network that resists deformation more effectively than Cr carbides alone.

Chromium content remains identical to maintain basic corrosion resistance, but 440C's higher C/Mo prioritizes hardness over corrosion resistance-making it the hardest, albeit least corrosion-resistant, 440 grade.