Q550 round steel (GB/T 1591) has a composition of 0.12–0.20% carbon (C), 0.20–0.55% silicon (Si), 1.00–1.60% manganese (Mn), 0.50–1.00% chromium (Cr), 0.20–0.50% molybdenum (Mo), 0.02–0.20% titanium (Ti)/niobium (Nb), ≤0.035% P, ≤0.035% S.
Compared to Q460 (0.12–0.20% C, 0.20–0.55% Si, 1.00–1.70% Mn, 0.50–1.00% Cr, 0.20–0.50% Mo, 0.02–0.20% Ti/Nb), Q550 has two key chemical adjustments: slightly higher manganese (1.00–1.60% vs. 1.00–1.70%-negligible) and more precise microalloy control, but the primary strength boost comes from optimized element interactions:
Chromium-molybdenum synergy: Cr (0.50–1.00%) and Mo (0.20–0.50%) form fine carbides (Cr₂₃C₆, Mo₂C) that pin dislocations, a process called precipitation strengthening. Q550's carbide density is higher than Q460's due to tighter composition controls, increasing resistance to deformation.
Microalloy refinement: Ti (0.02–0.20%) and Nb (0.02–0.20%) form ultra-fine nitrides/carbides (TiN, NbC) that refine grain structure. Smaller grains increase tensile strength because grain boundaries act as barriers to dislocation movement-Q550 has an average grain size of ASTM 9–10, compared to ASTM 8–9 for Q460.
Solid-solution strengthening: Manganese and silicon dissolve in the iron matrix, creating lattice distortions that further resist dislocation movement. While their composition ranges are similar to Q460, Q550's more uniform element distribution (from better manufacturing control) maximizes this effect.
Carbon content is identical to Q460, so it does not drive the strength difference-optimized alloy interactions are the key.



















