| product name | Carbon steel Angle Steel | |
| Materials | Q235A, Q235B, Q345, L245, L290, API5L X42,X52,X60,X70,X80, OCr13,1Cr17,00Cr19Ni11,1Cr18Ni9,0Cr18Ni11Nb,ST37.0, ST35.8,ST37.2,ST45,ST52,ST52.4,STP G38,STP G42,STPT42,STS49,20# etc |
|
| Size | Side width | 20x20mm-200x200mm |
| Thickness | 2-24mm | |
| Length | 6m/12m | |
| Technical Methods | Hot-rolled/Cold-drawn/Hot-expanded | |
| Ends | Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc. | |
| Testing Methods | Pressure test,Flaw detection,Eddy current testing, Hydro static testing or Ultrasonic examination and also with chemical and physical property inspection |
|
| Size(mm) | Thickness (mm) |
Theoretic weight (kg/m) | Size(mm) | Thickness (mm) |
Theoretic weight (kg/m) |
| 20*20*3 | 3 | 0.885 | 80*80*8 | 8 | 9.55 |
| 25*25*3 | 3 | 1.12 | 90*90*6 | 6 | 8.25 |
| 30*30*3 | 3 | 1.36 | 90*90*7 | 7 | 7.35 |
| 30*30*4 | 4 | 1.78 | 90*90*8 | 8 | 109 |
| 30*30*5 | 5 | 2.16 | 90*90*9 | 9 | 12.2 |
| 38*38*3 | 3 | 1.72 | 90*90*10 | 10 | 13.3 |
| 38*38*4 | 4 | 2.26 | 100*100*6 | 6 | 9.22 |
| 40*40*3 | 3 | 1.83 | 100*100*7 | 7 | 10.7 |
| 40*40*4 | 4 | 2.41 | 100*100*8 | 8 | 12.1 |
| 40*40*5 | 5 | 2.95 | 100*100*9 | 9 | 13.5 |
| 50*50*3 | 3 | 2.33 | 100*100*10 | 10 | 14.9 |
| 50*50*4 | 4 | 3.06 | 100*100*12 | 12 | 17.8 |
| 50*50*5 | 5 | 3.77 | 120*120*8 | 8 | 14.7 |
| 50*50*6 | 6 | 4.43 | 120*120*10 | 10 | 18.2 |
| 70*70*5 | 5 | 5.37 | 120*120*12 | 12 | 21.5 |
| 70*70*6 | 6 | 6.38 | 130*130*9 | 9 | 17.9 |
| 70*70*7 | 7 | 7.35 | 130*130*10 | 10 | 19.7 |
| 75*75*5 | 5 | 5.76 | 130*130*12 | 12 | 23.4 |
| 75*75*6 | 6 | 6.85 | 150*150*10 | 10 | 22.9 |
| 75*75*7 | 7 | 7.94 | 150*150*12 | 12 | 27.3 |
| 75*75*8 | 8 | 8.92 | 150*150*15 | 15 | 33.6 |
| 75*75*9 | 9 | 9.96 | 200*200*15 | 15 | 45.3 |
| 80*80*6 | 6 | 7.32 | 200*200*20 | 20 | 59.7 |
| 80*80*7 | 7 | 8.48 | 200*200*24 | 24 | 71.1 |
1.What is the purpose of the H-beam?
H-Beam can be used in the construction of buildings due to its ability to resist tension forces in compression or shear through its sides. The property of being able to withstand both tension and compression makes it ideal for building designs that require support for vertical loads such as cables or girders.
2.What is the meaning of H-beam?
An H beam is shaped like the letter "H" with one vertical flange and two long-side flanges, whereas an I beam has a cross-section that resembles the letter "I" with a single vertical web or web thickest at mid-span, two webs, and no bottom flange.
3.What are the benefits of H-beam?
I-Beam and H-Beam Differences An H-beam's durability comes from its strength-to-weight ratio in the cross-section. This optimized design means that these beam types have more strength against heavier loads. An H-beam can also be easier to weld, and because it has a large surface area in its cross-section, it earns a high strength rating.
4.Are H-beams recyclable?
Steel products are 100 percent recyclable at the end of their useful lives. Once produced, steel can be continually recycled into new steel products-a steel beam can become another steel beam, or a food can, refrigerator, or roof panel.
5.What are steel H beams used for?
H-section steel beams are commonly used in construction, where they are used to support floors, roofs, and other structures. They are also used in manufacturing, mining, and other industries.